Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Argyle, TX
Argyle, TX is Denton County’s horse country, and the gates out here work harder than most. We’re Ironworks Gate Co., and we repair driveway gates, estate gates, and ranch gates across Argyle every week. If your gate is off its track, the opener is grinding, or a hinge is sagging, call (254) 345-4831 and you’ll get a live person, not a voicemail tree. We arrive in uniform, price the job before any work begins, and stand behind every repair with a written 90-Day Done Right Promise.
Most gate repairs in Argyle are completed in a single visit. The tools and parts for nine major opener brands ride in our trucks, so we’re not making a diagnosis trip and then ordering parts for a second appointment. We show up ready to fix the gate, not just look at it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Argyle Homeowners Choose Ironworks Gate Co.
Argyle homeowners have been burned before. They’ve had a handyman adjust a hinge and leave the gate worse than he found it, or an opener company install a unit that couldn’t handle a 20-foot ranch gate. Victor Salinas leads our crews, and the instruction is simple: do the job the way you’d do it for your own mother’s driveway. That means background-checked technicians, steel-toed boots on time, and no surprise charges at the end.
We work regularly in neighborhoods like Harvest, Canyon Falls, and the equestrian acreage along Crawford Road and Copper Canyon Road. The review pattern from Argyle is consistent: homeowners mention that the tech explained what failed, showed them the worn part, gave a fixed price, and had the gate working before the truck left the driveway. For over 42 years, Ironworks has operated on one standard: the Keystone Standard. If it’s not right, we come back. No paperwork, no arguing, no exceptions.
When a homeowner in Argyle calls about a gate that won’t open, they don’t want a quote in three days. They want the gate open. We run repair calls across Argyle with urgency that matches the situation, because a gate stuck shut can trap a horse trailer or block a family’s only route to work.
Gate Repair Services We Offer in Argyle
Gate Repair
This is the bread and butter. Broken hinges, sagging posts, snapped cables, bent tracks, welded seams that have split. We diagnose the full gate, not just the symptom, and we fix it in one visit whenever parts allow. Argyle’s clay soil puts extra stress on post footings, so our repairs account for the ground the gate sits on.
Learn more about our Gate Repair in Argyle.
Gate Installation
New gate construction is measured, planned, and priced with a written estimate that won’t change on install day. We build for the life of the property, not the life of a warranty period. Whether it’s a pipe-and-cable ranch gate on an equestrian parcel or an ornamental iron estate gate on a custom home site, it’s done right and backed in writing.
Learn more about our Gate Installation in Argyle.
Gate Motor & Opener
We carry the electronics, arms, and boards to service Liftmaster in Argyle, FAAC, BFT, and other major brands. If your opener is over ten years old and running on solar, there’s a good chance you’re in the replacement wave hitting Argyle right now. More on that below.
Learn more about our Gate Motor & Opener in Argyle.
Gate Access Control
Keypads, intercoms, vehicle detection loops, phone-based entry. For Argyle properties with multiple family members, ranch hands, and delivery traffic, Gate Access Control - Argyle is about more than convenience. It’s about knowing who’s at the gate and letting them in without walking 200 yards in the rain.
Learn more about our Gate Access Control in Argyle.
Gate Parts & Welding
Sometimes the gate frame is fine and the hardware is not. We keep high-wear parts on the truck and offer our Gate Parts & Welding in Argyle when the repair calls for it. Cracked welds on square-tube steel, bent hinge plates, broken wheel carriages. Fixed once, fixed right.
Learn more about our Gate Parts & Welding in Argyle.
Neighborhoods We Serve in Argyle
We run calls across all of Argyle, from the master-planned sections of Harvest and Canyon Falls to the older acreage properties off FM 407 and Crawford Road. A representative sample of neighborhoods where our trucks are a regular sight:
- Harvest
- Canyon Falls
- Waterbrook
- Country Lakes
- The acreage properties along Copper Canyon Road and Hickory Hill Road
Response time across the Argyle area is typically same-day or next-morning for non-emergency repairs, and faster when a gate is fully down or a vehicle is trapped.
Why Argyle’s Climate & Housing Affect Gate Repair
The Blackland Prairie and Cross Timbers clay under Argyle is a moving thing. Wet winters swell it, July and August bake it, and the ground heaves enough to push gate posts out of plumb by a visible inch or more. That’s not a one-time fix. Post-reset and hinge realignment are recurring maintenance calls for Argyle properties, and any repair that ignores the soil movement is going to fail again within a couple of seasons.
Then there’s February 2021. The hard freeze that hit Denton County damaged hydraulic actuators, circuit boards, and keypad wiring on plenty of operators that were never rated for sustained sub-freezing temperatures. If your gate system dates from before that storm and hasn’t been opened up since, there’s a strong chance the failure you’re seeing now has winter damage at its root. We find it in Argyle gates regularly.
And the solar factor. Argyle’s long private driveways make running electrical conduit to a gate cost-prohibitive in many cases, so solar-powered swing gate operators are everywhere. Those units, many installed during the 2000s-2020s growth boom, are now hitting their 10-15 year service interval. Batteries, panels, controller boards. We’re replacing solar operator systems across Argyle at a rate that neighboring flat-suburb markets just don’t see.
Pricing for Gate Repair in Argyle
Every price is settled before a single bolt is turned. Here are honest ranges for the most common Argyle gate repairs:
| Repair Type | Typical Range |
|---|---|
| Hinge replacement (single leaf) | $180-$450 |
| Post reset / plumb correction | $350-$900 |
| Track or wheel carriage repair | $220-$600 |
| Opener circuit board replacement | $300-$800 |
| Full solar operator replacement | $1,400-$3,200 |
| Seasonal tune-up | $89 (standing offer) |
We offer $50 off any repair over $250 and a free second opinion on any written estimate. Seniors and veterans get 5% off, always. Call (254) 345-4831 for an exact quote on your gate.
Service Area - Cities Near Argyle
Ironworks Gate Co. serves Argyle and the surrounding Denton County communities. If you’re in Flower Mound, Denton, Ponder, or Justin, our crews cover those areas on the same schedule. Dispatch and scheduling coordinate from our Dallas-Fort Worth office, and our techs know the roads and the soil across all of Denton County.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Argyle
Most Argyle gate repairs fall between $180 and $900, depending on whether it’s a hinge, track, board, or post issue. Full opener replacements range from $1,400 to $3,200. Every quote is fixed before work starts. Call (254) 345-4831 for an exact number on your gate.
In most cases, yes. We run repair calls across Argyle with same-day or next-morning response for non-emergency issues, and we carry common repair parts on the truck for a single-visit fix. If you’re blocked in or the gate is off its track entirely, tell the dispatcher and we’ll prioritize it.
Yes. Argyle has more solar gate operators than almost any market we serve in the metro, because long private driveways make running grid power expensive. We service and replace solar panels, batteries, and controller boards on Mighty Mule repair in Argyle, LiftMaster, FAAC, BFT, and other major brands.
Extended sub-freezing temperatures damaged a lot of gate hardware across Argyle in 2021 and the freezes since. Hydraulic fluid contracts, boards fracture, keypad wiring gets brittle. If the latch or opener hasn’t worked right since a freeze, the damage is usually internal and worth a professional inspection rather than a lube-and-pray fix.
Always. Before we quote any equestrian property in Argyle, we ask about trailer clearance and how the gate is cycled from the truck. Most residential-grade openers can’t handle a 16-20 foot clear opening cycling repeatedly, so we’ll quote commercial-rated or dual-swing heavy-duty units instead. The gate has to work every time, not just on calm days.
The 90-Day Done Right Promise is written on every job. If something’s not right, we come back and make it right. No paperwork, no arguing. That’s how Ironworks Gate Co. has done business for over 42 years, and it’s how Victor Salinas runs every crew that drives into Argyle.
Call (254) 345-4831 now to schedule your gate repair in Argyle. A live person answers, 24 hours a day, 7 days a week. Free estimates, upfront pricing, and a written guarantee on every job.
Written by Victor Salinas, Owner at Ironworks Gate Co., providing gate repair services to Argyle, TX since 1984.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Argyle Customers Say
"The hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a new gate, which two other companies had pushed for."
- Megan Whitaker"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad