Frequently Asked Questions

Gate repair service starts with a full inspection of the gate, hinges, posts, opener, safety edges or photo eyes, and control wiring. We check for wear, alignment, corrosion, and strain on the motor. Then we tell you exactly what we found, what needs fixing, and what can wait. You approve the price before any work begins. After the repair, we run the gate through repeated open and close cycles to confirm it's balanced, level, and stopping where it should. The job isn't done until the gate closes square.

Most gate repairs in Flower Mound take between one and three hours on site. Common fixes like hinge replacement, sensor realignment, keypad reprogramming, or a limit switch adjustment are usually done within a couple of hours. Heavier jobs, like replacing an operator arm or welding a cracked frame, can take half a day. If a part needs to be ordered, the on-site work is quick but the wait depends on the supplier. We'll tell you the timeline upfront so you know what to expect before we start.

Yes. We provide free estimates for all gate repair and installation work in Flower Mound and the surrounding areas. We come out, inspect the gate, diagnose the problem, and give you a written price. That price is the price; it's agreed before any work starts, and it doesn't change unless you add scope. You'll know the number before you say go. If the repair isn't worth doing, we'll tell you that too. Call (254) 345-4831 to schedule an estimate.

We repair swing gates, slide gates, cantilever gates, and pedestrian gates, and we work on steel, iron, aluminum, and chain-link. Most Flower Mound driveways have either a single or dual swing gate or a rolling slide gate. Each has different hinge, track, and opener requirements, and we handle all of them. If the gate moves and it's not moving right, we can usually fix it. If it's beyond saving, we'll show you why and quote a replacement honestly.

Call (254) 345-4831. You'll reach a live coordinator who takes down the details and connects you with our local team. We schedule a visit, arrive on time, inspect the gate, and give you a written quote. Once you approve it, we complete the repair, test everything, and walk you through what we did. You pay the agreed price, and you get our 90-day written guarantee on the work. That's the whole process.

We repair all major gate opener brands, including Mighty Mule, LiftMaster, FAAC, and BFT. Each brand has its own control board logic, limit settings, and common failure points, and we're familiar with all of them. Some operators fail mechanically, like a stripped gear. Others fail electrically, like a fried board after a storm. We diagnose the actual fault before recommending repair or replacement. If the opener is worth saving, we save it. If it's not, we'll quote a replacement and you decide.

Yes. Hinge repair and welded frame repair are a core part of what we do. Over years of opening and closing, hinge pins wear, weld points crack, and gates start to sag or bind. That strain then transfers to the opener motor, which is why a sagging gate often kills an opener prematurely. We re-weld, reinforce, replace hinge hardware, and re-hang the gate so it swings true again. Fixing the mechanical side properly is what keeps the electrical side from failing again a year later.

Yes, and it's one of the most common jobs we do in Flower Mound. Many homes already have a solid gate but no automation. We assess the gate's weight, condition, and swing arc, then spec an opener rated to handle it: LiftMaster and Mighty Mule are popular for residential gates, while FAAC and BFT appear more often on heavier estate gates. We also handle the power run, safety edges or photo eyes, and programming. You get a free measure and a written price before anything is ordered.

The most common causes are a failed capacitor, a stripped gear, a blown control board, misaligned safety sensors, or a gate that's binding because the hinges or track have worn. Sometimes the problem is as simple as a dead keypad battery or a breaker that tripped. But when an opener fails repeatedly, the root cause is usually mechanical: the gate is fighting the motor. We trace the failure to its source rather than replacing parts on guesswork. A motor that's working against a sagging gate will fail again no matter how many boards you swap.

Every pro working under our name is required to hold the license and insurance their state requires, and that includes Texas gate and access work. Ironworks Gate Co. carries the coverage appropriate for the work we do on your property. We're happy to walk you through what that includes when you call. What matters most to us is that you feel comfortable with who's on your property. We're upfront about credentials because you have every right to ask.

You'll get trained, local technicians led by Victor Salinas, who heads our Flower Mound operations. The team works on gates every day: hinges, welds, motors, boards, keypads. What we send to your house is the same standard Ironworks Gate Co. holds across every branch: work done right, the 400th job with the same care as the first. We work in your house the way we'd work in our mother's, and that's the K.E.Y.S. standard we operate under.

Yes, we respond to emergency gate repair calls. Our phone is answered 24/7 at (254) 345-4831. When a gate is stuck open, stuck closed, or hanging off a hinge, we understand the urgency. A gate stuck open is a security risk; a gate stuck closed is a daily disruption. Call and you'll reach a live coordinator who can get a technician scheduled to your property. We'll diagnose what happened and get the gate secure and functioning as fast as the job allows.

First, if the opener has a manual release, you can disengage it to move the gate by hand and secure the opening. Do not force a gate that's bound against its hinges or track; a gate under tension from a spring or opener can move unpredictably and cause serious injury. If you're not comfortable, leave it and call us at (254) 345-4831. We'll secure the gate, diagnose the failure, and give you a written quote before any repair begins.

Call (254) 345-4831. That's the fastest path to a live person, and that person's whole job is to get the right technician to you. Have your address and a basic description of what the gate is doing, or not doing, when you call. The more detail you give, the better prepared we'll be when we arrive. We'll give you a clear idea of when to expect us, and we'll be there when we say.

The Keystone Standard, applied to gates, is simple: 90 days, in writing, no arguing. If something we repaired or installed isn't right within 90 days, we come back and make it right at no charge. No paperwork chase, no finger-pointing, no fine print. That guarantee covers the work we do, and it's stamped on every job. A century ago every town had an ironworks, and the gates it made are still swinging. We hold that standard.

Our 90-day written guarantee covers our workmanship on every job. Manufacturer warranties on parts, like openers from LiftMaster or Mighty Mule, also apply and run separately, typically one to several years depending on the component. We'll explain what's covered and for how long before we install anything. If a part we installed fails within the manufacturer's window, we'll handle the warranty replacement. That's part of standing behind the work.

We don't promise a specific arrival window that we can't back up, because honest timing matters more than a fast-sounding claim. What we promise is that you'll get a straight answer about when we can be there, and we'll be there when we say. Our phone is answered 24/7 at (254) 345-4831, so you can always reach a live person to check availability or schedule a visit. The quote is locked before work starts, and the 90-day guarantee applies when we're done.

Simple tasks like changing a keypad battery or tightening a loose bolt are fine for most homeowners. But anything involving a gate under tension, a spring, or a powered opener is genuinely dangerous. A swing gate spring holds enough energy to cause serious injury if it releases wrong, and a motorized gate that moves on its own can crush or pin. We recommend a trained professional for any repair involving springs, hinges under load, track systems, or opener mechanisms. The cost of a pro is less than a hospital bill or a gate through a car door.

We serve Flower Mound and the surrounding communities: Argyle, Bartonville, Copper Canyon, Corinth, Double Oak, Hickory Creek, Highland Village, Justin, Krum, and Lantana. If you're in any of those areas and your gate is sagging, stuck, or dead, call (254) 345-4831. We'll let you know if we cover your address and get you on the schedule. Most of our work stays within this service area, which is how we keep response times honest and the work local.

We do both. We install new driveway gates, estate gates, pedestrian gates, and complete automated systems. We also repair and refit existing gates that have years of life left in them. If your gate is structurally sound but the opener is dead, we'll replace the opener. If the gate is rusted through or the posts are failing, we'll quote a full replacement. You get a free measure and a written price either way, so you can make the decision with clear numbers in front of you.

In North Texas, a well-maintained gate opener typically lasts 8 to 12 years. Our climate works against them: summer heat bakes the electronics, and the clay soil in areas like Flower Mound and Bartonville shifts with moisture, which can pull posts out of alignment. That misalignment puts strain on the motor and shortens its life. Regular hinge and track maintenance extends opener life significantly. If your opener is older and failing, call us before you replace it; sometimes the fix is mechanical, not electrical.

Still have questions about gate repair in Flower Mound? Call (254) 345-4831 and talk to a live person. Estimates are free, prices are locked before work starts, and the 90-day guarantee is in writing.

Written by Victor Salinas, Owner at Ironworks Gate Co., serving Flower Mound since 2013.