Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Flower Mound Homeowners
A new driveway gate in Flower Mound typically costs between $4,800 and $14,000 installed, depending on the gate style, size, automation package, and whether we’re working with a fresh build or a replacement. Most standard installations take one to three days on site, with the gate itself often fabricated to order in the weeks prior. Ironworks Gate Co. has been setting gates in North Texas since 1984, and we’ve learned that a gate in Flower Mound has to handle three things: summer heat that bakes the finish, expansive clay soil that shifts the posts, and the occasional hail storm that finds every weak weld. Victor Salinas leads our team of background-checked, uniformed technicians, and every job carries the 90-Day Done Right Promise in writing. No paperwork, no arguing. If something isn’t right after we leave, we come back and make it right. Call (254) 345-4831 any time, day or night, and a live person will answer.
What Our Gate Installation Service Includes
Gate installation means more than setting two posts and hanging a leaf. Done correctly, it’s a small construction project: footing depth, hinge alignment, operator mounting, wire runs for the motor, and safety edges that stop the gate if a child or pet is in the path. We handle all of it. Here’s what our Gate Installation in Flower Mound covers, and what each job involves.
Driveway Gate
A driveway gate is the most common installation we do in Flower Mound, and it’s also the one with the most variables. The gate has to match the width of your drive, the setback from the street, and the weight your opener can move without straining. We measure everything on site, order or fabricate the gate to those dimensions, and set the posts in concrete deep enough to stay plumb through decades of clay soil expansion. We also run the conduit for the operator and keypad before we pour, so there are no exposed wires running across your lawn. Driveway gates are usually a one to two day install once the gate is on hand, and we quote the job before a single bolt is turned.
Pedestrian Gate
A pedestrian gate gives you a way in and out without cycling the big driveway gate every time, which saves wear on the motor and bearings. These are common alongside stone or brick entryways in neighborhoods like Bridlewood and Wellington. We build pedestrian gates to match the driveway gate in style and finish, hung on adjustable hinges so they don’t sag over time. We can add a keypad, a keyed lock, or an intercom release tied to your existing access system.
Sliding Gate
Sliding gates are the right call for properties with a steep driveway or limited swing clearance. Instead of arcing open, the gate rides on a track or a cantilever system across the driveway opening. In Flower Mound, where many lots have gentle slopes, a cantilever slide often works better than a track because gravel and grass clippings don’t jam the rollers. We build and install both configurations and size the opener to the gate’s weight, not the other way around.
Swing Gate
Swing gates are the classic choice for a double-wide driveway, and they come in single or double leaf depending on your opening. The challenge on a swing gate is always the same: the hinges and the posts carry the entire weight of the gate, every day, for years. We use heavier-gauge steel and stronger hinge hardware than most big-box kits call for, because a sagging gate never recovers on its own. If you’re replacing an old swing gate in Flower Mound, we’ll inspect the existing posts before quoting for reuse, and we won’t reuse a post that won’t hold. For a new setup, see our Best Gate Installation in Flower Mound, TX.
Double Gate
A double gate is a pair of leaves that meet in the middle, common on wider drives where a single leaf would be too heavy and too slow. The tricky part on a double is getting both leaves to close evenly and latch without slamming. We hang double gates with overlapping astragals so wind doesn’t push through the seam, and we sync the operators if you want both leaves automated. Most double gate installs in Flower Mound run about a day and a half on site after the gate is fabricated.
Security Gate
A security gate is a gate built with a different bar: heavier steel, tighter pickets, and controls that limit who gets through. We’ve installed security gates on estates and private lanes around Flower Mound where the driveway itself is a quarter mile long. These jobs usually pair the gate with an access control system, a vehicle detection loop, and a battery backup on the opener so the gate still works during a power outage. We’ll talk through the security level you want, then build to that standard without over-engineering it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We work on nine automation brands because Flower Mound driveways have all of them. LiftMaster and Mighty Mule are the two we see most often on residential gates in this area, and we stock OEM parts for both so an install doesn’t stall waiting on a backordered board. LiftMaster’s swing and slide operators are built well, but the wiring and safety-edge setup is where DIY and handyman installs go wrong, and that’s where our experience matters.
FAAC and BFT show up more on larger estate gates and hydraulic operators, where the stakes are higher and the programming is less forgiving. We’ve been trained on their residential and light-commercial lines, and we program the limits, force settings, and safety inputs on the first visit. Whether you have one of those brands, or a Ghost Controls, DoorKing, Viking, Linear, or Elite, we can set the gate up correctly and stand behind it with the 90-Day Done Right Promise.
Signs You Need Gate Installation Right Now
- The gate has been welded back together more than once. A gate that has needed repeated weld repairs has a structural problem, not a weld problem. The frame is fatigued or the hinges are pulling, and another patch will buy you months, not years. At some point, replacing the gate leaf costs less than chasing the same crack around the frame.
- The gate drags or scrapes on the ground. When a gate starts dragging, the hinges or posts have moved, and that movement only accelerates. A gate that scrapes is also a gate that’s wearing out the opener motor, which is straining against friction every cycle. If the posts are still sound, we can hang a new gate. If they’re not, new posts go in with the new gate.
- The opener can’t move the gate without groaning. Mighty Mule and LiftMaster openers are sized by weight and cycle rating. If your opener is grinding or stalling, the gate may have gained weight from rust and repairs, or the opener was undersized from the start. A new gate matched to a properly sized operator solves both.
- You’re widening the driveway or changing the layout. A new pool, a garage addition, or a longer driveway can make your old gate the wrong size or the wrong style. If the gate no longer covers the opening or swings into a new obstacle, it’s time for an installation, not a modification.
- The gate is simply done. Steel gates in North Texas last roughly 15 to 25 years depending on the grade and the finish. If yours is rusted through at the bottom rail, the pickets are loose, and the frame is bowing, you’re past repair. We’ll haul the old gate off and set a new one that’s built for the next 25.
Our Gate Installation Process - Step by Step
- 1
We come out and measure everything. Drive width, slope, setback, existing posts, power source location, and the path the gate will travel. We also check what’s underground near the gate path, because the clay soil in Flower Mound shifts and we want the footings sized for that movement. This visit is free, and you get a written quote out of it.
- 2
We order or fabricate the gate, then prep the site. Most of our Flower Mound customers get a gate built to their exact opening, which takes a few weeks. While the gate is in fabrication, we schedule the install and make sure the power run and any low-voltage access wiring are planned for.
- 3
We set the posts and build the foundation. Posts are set in concrete footings deep enough to resist frost and clay movement. We use a string line and a level, and we check the reveal between the gate and the ground before the concrete sets. A gate post that’s a half inch off plumb will sag, scrape, and strain the hinges forever.
- 4
We hang the gate, mount the operator, and wire the controls. The gate goes on first, and it has to open and close smoothly by hand before we touch the opener. If it doesn’t swing freely, no motor will fix it. Then we mount the opener, set the travel limits, program the force settings, and install photo eyes and safety edges. We test the gate through at least 20 full cycles.
- 5
We walk you through it, and we leave you with the written guarantee. You’ll see the gate run, open and close it yourself, and know how to use the keypad and the manual release. The 90-Day Done Right Promise goes in writing. If anything isn’t right, we’re back. Victor Salinas has run the company on that promise for over four decades, and the 400th job gets the same care as the first.
How Much Does Gate Installation Cost in Flower Mound?
A pedestrian gate in Flower Mound typically runs $1,200 to $3,500 installed. A single swing driveway gate runs $4,800 to $9,000, and a double swing or sliding gate runs $7,500 to $14,000. A security-grade estate gate with access control, battery backup, and a vehicle loop can go $15,000 to $30,000 and up. These are honest ranges based on what we’ve installed in Flower Mound, not bait numbers to get a phone call.
What moves the price: the size and weight of the gate, the grade of steel, the style (a custom arched top costs more than a standard square), the opener brand, and how far the power has to be run from the house or transformer. Automation adds $1,800 to $4,500 depending on the operator and controls. The free estimate we give you includes a line-item breakdown, not a lump sum, so you can see exactly what you’re paying for. We quote the job before work starts, and that quoted price is what you pay when we finish. No change orders unless you ask for one, and no surprises on the bill. If you’ve got a written estimate from another company, bring it to us, and we’ll give you a free second opinion on it.
Gate Installation Near Flower Mound - Our Service Area
Ironworks Gate Co. is based right in Flower Mound and serves the surrounding communities, including Bartonville, Copper Canyon, Corinth, Double Oak, Hickory Creek, Highland Village, Justin, Krum, and Lantana. We also run installation crews to nearby Argyle and Denton regularly, so an appointment doesn’t take two weeks to schedule. Whether you’re here in town or just outside it, this page covers gate installation in Flower Mound and the surrounding service area, and the home page has our full list of services.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Flower Mound
Gate installation is the full process of setting a new driveway, pedestrian, or security gate on your property: measuring the opening, setting the posts, hanging the gate, mounting the opener, and wiring the controls. It’s not a kit job where you bolt a box-store gate to a fence post. In Flower Mound, we build the footing to hold the gate plumb through freeze-thaw cycles and clay soil shifts, and we size the opener to the actual weight of the gate. Call (254) 345-4831 for a free estimate.
Most standard driveway gate installations in Flower Mound take one to three days on site once the gate is fabricated and on hand. Custom gates take two to six weeks to build before the install date, and we’ll give you a firm timeline when we quote the job. Pedestrian gates can often be done in a single day. You’ll know the schedule before we start, and we’ll be there when we say.
Expect $4,800 to $14,000 for most driveway gate installations, with pedestrian gates running $1,200 to $3,500 and security-grade estate gates going higher. The spread depends on gate size, steel grade, style, automation, and the power run distance. Our free estimate breaks the price down line by line, and the quoted price is the price you pay. Call (254) 345-4831 for an exact quote on your driveway.
Yes. We install and program LiftMaster, Mighty Mule, FAAC, BFT, and five other major automation brands, and we stock OEM parts for the lines we see most often in Flower Mound. That means we don’t have to substitute a universal control board and hope it pairs with your keypad. Whatever opener you have or choose, we’ll set the limits, force, and safety inputs correctly on the first visit.
For a gate that won’t close or a security gap you need fixed now, our Emergency Gate Installation in Flower Mound, TX team carries emergency availability and a live person answers the phone 24 hours a day, 7 days a week at (254) 345-4831. We can’t always promise same-day for a full custom installation, because the gate itself takes time to build, but we can often get a technician out to assess the situation and secure the property the same day you call.
Every installation is backed by the 90-Day Done Right Promise in writing. If anything isn’t right within 90 days, we come back and make it right at no charge, no paperwork and no arguing. Beyond that, the manufacturers’ warranties on the operator and components apply, and we’ll walk you through what’s covered when we finish the job. A square deal means you know the terms before you need them.
Clear the area around the gate opening: move vehicles, planters, and anything within about 10 feet of the work area. Mark any sprinkler lines or buried utilities near the gate path if you know where they are, and have a plan for pets so they’re not underfoot while we work. We’ll handle the rest, including hauling off the old gate if there is one. Call (254) 345-4831 and we’ll walk you through what else applies to your property.
Schedule Your Gate Installation Service in Flower Mound Today
If you’re ready for a gate that closes square, opens smooth, and holds up through the next 25 Flower Mound summers, call (254) 345-4831. A live person answers around the clock, and we’ll set up a free on-site estimate with no obligation. You’ll get a written price before any work starts, and the 90-Day Done Right Promise when we’re done.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Flower Mound since 1984.