Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Denton
A new driveway gate in Denton typically costs between $3,200 and $9,500 installed, depending on whether you choose ornamental steel, aluminum, or a fully automated swing or slide system. Most installations we schedule in Denton take one to two days once materials are on hand, and we will walk you through every option before any work begins. We know this city well, from the clay-heavy lots off US-380 to the master-planned communities around Robson Ranch, and we build every gate to handle what Denton’s soil and weather actually throw at it. Call (254) 345-4831 for a free measure and a written price.
Why Ironworks Gate Co. Is Denton’s Preferred Gate Installation Company
Victor Salinas has built Ironworks Gate Co. around a simple standard: the gate works every time, for years, and if it does not, we come back and make it right. That is the 90-Day Done Right Promise, and it is in writing on every job we do in Denton. No paperwork chase. No arguing. Just a guarantee with our name on it.
Denton homeowners tend to keep their homes for decades. We respect that. A gate is not a one-season purchase; it is part of the house, and it should close like the day it was hung, year after year. That is why we weld our own steel, set posts deeper than code minimums on clay lots, and pair every operator with the right battery backup and safety edges. We also send background-checked, uniformed technicians who work in your driveway the way they would work in their own mother’s. And when you call us, a live person answers. Twenty-four hours a day, seven days a week. Not a voicemail tree.
The company has served North Texas for over 42 years, founded in 1984, and our crews work in Denton weekly. We are not a handyman side business. Gates are all we do, from hinges and welds to keypads, loop detectors, and automation.
Our Gate Installation Services in Denton
Ironworks Gate Co. specializes exclusively in driveway and estate gates. On any Gate Installation job in Denton, we handle the full scope, from post footings and steel fabrication to operator wiring, access control, and final tune. Here is what we install most often for Denton homes.
Driveway Gate Installation
Driveway gates in Denton split into two worlds: older homes near downtown and UNT with shorter, simpler entrances, and newer HOA subdivisions along the I-35E and US-380 corridors where ornamental steel and automated operators are standard. We build for both. On a standard single-driveway swing gate in Denton, count on $4,200 to $8,500 installed, with automation included on most builds.
Swing Gate Installation
Swing gates are the most common type in Denton, and also the most vulnerable to this city’s soil. Blackland Prairie clay expands and contracts so aggressively that a post set at the code-minimum depth can move two to three inches out of plumb in a single wet-dry cycle. We set posts deeper, brace the footing, and align the hinges so the gate swings true through every season. Typical Denton swing gate installs run $3,800 to $8,000.
Sliding Gate Installation
Sliding gates work well on Denton lots where a driveway slopes or where there is not enough setback for a swinging leaf. We see a lot of HOA-mandated slide gates in the master-planned communities, and we build the track and support posts to handle clay movement without sagging mid-span. A steel slide gate with automation for a Denton driveway starts around $5,500 and usually lands between $7,000 and $11,000 depending on length and operator.
Security Gate Installation
Security gates in Denton often serve two purposes: keeping the street out and satisfying an HOA’s architectural spec. We install perimeter and entry gates with keypads, intercom tie-ins, and loop detectors tuned for slow-moving golf carts, which matters more than you would think out at Robson Ranch. Security gate projects in Denton typically run $6,000 to $14,000, depending on gate width, steel gauge, and access features.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Denton
We are trained and equipped on nine gate-automation brands, including LiftMaster, DoorKing, Elite, and Mighty Mule. That matters when your HOA specifies a brand, or when an existing operator fails and you do not want to replace the whole system. We keep common parts stocked for Denton jobs and can have most replacement operators on a truck within a day. If you buy a new gate from us, we will pair it with the right LiftMaster, Elite, or DoorKing operator for your exact setup, and we will program every remote and keypad before we leave the driveway.
Common Gate Installation Problems We See in Denton Homes
- Post footing heave on clay: Blackland Prairie soil swells with spring rain and shrinks in summer drought, torquing gate posts out of level and binding the operator. A gate that worked fine in October can be dragging by March without a single mechanical failure.
- Freeze-thaw damage: The February 2021 ice storm seized gate operators and snapped hinge posts across Denton. We still replace freeze-cracked ornamental steel posts from that week, and we build today’s installs with weather-sealed operators and battery backup for a reason.
- HOA slide gates sagging mid-track: On clay slopes in some of Denton’s newer subdivisions, original slide gate posts were poured too shallow. The gate sags a quarter-inch, the rack and pinion strips, and the motor burns out chasing it. We repour the footing, not just the gear.
- Operators dying young from power surges: Denton’s spring storm season brings brownouts and surges that kill unprotected operator boards. We install surge protection and battery backup on every automated gate we touch, so the next storm is a non-event.
Pricing for Gate Installation in Denton, TX
Here is what Denton homeowners should expect to pay for a new gate, installed with posts, hardware, and labor included. A basic ornamental steel pedestrian gate runs $900 to $2,200. A single driveway swing gate starts around $3,800 and typically lands between $4,500 and $8,500. A double gate or a slide gate with automation runs $6,500 to $12,000. A security-grade perimeter gate with keypad access starts at $6,000 and can reach $14,000 for wider, heavier builds. The main cost drivers are gate width, steel gauge versus aluminum, whether the site has power, and the depth of footing work the clay demands. We quote every Denton job before work begins, in writing, and that is the price you pay. Call (254) 345-4831 for a free measure, and remember we offer a Free Second Opinion on any written estimate you already have, plus $50 off any repair over $250 and a permanent 5% Senior and Veteran discount.
We Also Serve Cities Near Denton
Our crews run routes through Denton weekly and also cover Krum, Argyle, Ponder, and Flower Mound for gate installation and repair. If you are just outside city limits, call us and we will work you into the schedule. The same pricing, the same written promise, the same crew standards.
Serving Denton, TX - Our Local Coverage Area
We’re based in the Denton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Denton
Because the post has moved. Denton’s Blackland Prairie clay swells with spring moisture and pushes the post out of plumb, which changes the hinge geometry and makes the gate fight the operator. The operator is usually fine; the footing is the problem. We fix it by resetting or repouring the post deeper and re-aligning the hinges. Call (254) 345-4831 and we will diagnose it on-site.
Yes. We install operators with battery backup and weather-sealed control boards, sized for freeze conditions. The February 2021 storm taught everyone in Denton the value of an opener that works when the power is out and the temperature is sixteen degrees. Battery backup is a standard upgrade we recommend on every automated gate here.
In most cases, yes. A loop detector tells the gate to open for vehicles exiting and holds it open for a vehicle coming in, and it is required by many Denton HOA gate specs. Out at Robson Ranch, loops are tuned for golf cart speeds because standard vehicle loops miss slower carts. We install and tune loop detectors on every HOA gate job.
Eighteen to twenty-four inches below grade, depending on the gate width and soil composition. That is below the active heave zone for most Denton clay. Code minimums are shallower, and that is exactly why so many 2000s-era HOA gates in this city are now leaning and binding. We set every post below the heave line and use concrete footings that resist lateral movement.
Yes, and we do it regularly for rural lots and older properties outside the denser subdivisions. A solar opener with a buried battery bank and a Mighty Mule or Ghost Controls drive will run a single swing gate year-round in Denton’s climate, provided the panel gets four to six hours of direct sun most days. We will assess the site and tell you honestly if solar will work or if a hardwired run is the safer long-term call.
Call Ironworks Gate Co. for Gate Installation in Denton
If you live in Denton, you have probably seen more than a few gates leaning, sagging, or frozen shut this year. Ours will not be one of them. We build every gate for this soil, this weather, and the way you live, whether that means golf carts at Robson Ranch, a long driveway off US-380, or an older home near the university. We quote a square price before any work begins, we stand behind every job with a written 90-Day Done Right Promise, and a live person answers the phone whenever you call. Reach us at (254) 345-4831 for a free estimate on gate installation in Denton.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Denton and the North Texas region for over 42 years.