Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Krum
Gate installation in Krum runs $1,400 to $4,800 for a standard driveway swing or slide gate, and $600 to $1,500 for a pedestrian gate, with the final number depending on gate length, material, and whether new concrete footings are required. Most jobs take one to two days once materials are on hand. If you’re out on a ranchette near Plainview Road or a newer lot off FM 2450, call (254) 345-4831 and we’ll get a technician to your property for a free measure and written quote.
We’ve been working the Krum area long enough to know what the clay does to a gate post. That matters more than most people realize when they’re pricing an installation. A gate hung wrong on Blackland Prairie soil will fight you every season until it’s fixed properly.
Why Ironworks Gate Co. Is Krum’s Preferred Gate Installation Company
Ironworks Gate Co. has been building and hanging gates for over 42 years, since 1984, and our Gate Installation crews have worked more Krum ranchette properties than we can count. The work here is different from what you’ll find 15 miles east in Denton. Krum lots are bigger, the gates are longer, and the soil underneath them moves. We plan for that from the first hole we dig.
Every gate we install is backed by the 90-Day Done Right Promise, our written Keystone Standard. If something isn’t right within 90 days, we come back and make it right. No paperwork, no arguing. That’s how we’ve kept customers in Krum calling us back when they add a second gate or replace an old opener.
Victor Salinas leads our installation and repair operation, and the crews showing up at your gate are background-checked, uniformed, and trained on nine automation brands including LiftMaster, Mighty Mule, and FAAC. When you call, a live person answers, 24 hours a day. You’ll never sit through a voicemail tree.
We settle the price before a single bolt is turned. A square deal, written down. No surprises on the bill. That’s the only way we work, in Krum or anywhere else.
Our Gate Installation Services in Krum
Driveway Gate Installation
Most Krum driveways call for a 12 to 16 ft gate, either a single swing leaf or a slide gate if the driveway slopes or curves. On acreage lots off Plainview Road and along Ranch Road, we set posts in proper concrete footings, not the loose caliche that’s been there for forty years. A new driveway gate in Krum with a basic opener typically runs $2,200 to $4,800, depending on steel gauge, ornamental work, and automation.
Pedestrian Gate Installation
Pedestrian gates on Krum ranchettes are often the forgotten entry. They get hung with the house gate hardware and eventually sag until they drag. We install standalone pedestrian gates with welded steel frames and set posts deep enough to hold through a wet spring and a dry August. Most pedestrian gate jobs run $600 to $1,500, including a proper latch and hinge set.
Sliding Gate Installation
A slide gate makes sense on Krum properties where the driveway slopes or where a swing gate would block a tractor or horse trailer. We run cantilever and V-track slide systems, and we set the track and operator on a poured footing rated for the clay movement we see every season. A residential slide gate with automation in Krum runs roughly $3,000 to $5,500.
Swing Gate Installation
Swing gates are the most common gate on Krum acreage because they follow the old farm fence lines. We build them from heavy steel, weld the hinges rather than bolting them where we can, and set posts at least 36 inches deep in concrete. A single swing gate with a LiftMaster or Mighty Mule opener runs $2,200 to $4,000 in Krum. Double swing gates, which we see a lot on older ranch entrances, run higher.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Krum
We’re certified on nine gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Krum customers, that means when an opener goes down, we’re not guessing. We carry common parts on the truck for LiftMaster and Mighty Mule systems, which are the two brands we see most often on Krum ranchettes. If we need a FAAC or BFT board, we typically have it within a day or two and can get it installed without another full week of waiting.
We also service older operators that other shops won’t touch. If you inherited a decade-old Viking on a 16-ft gate and don’t want to replace the whole opener, we’ll tell you honestly whether it can be saved.
Common Gate Installation Problems We See in Krum Homes
Krum’s Blackland Prairie soil is the root of most gate failures we see. Houston Black clay expands when wet and contracts hard when dry. That cycle pushes posts out of plumb, throws hinges, and drags gates off-level within a single season. These are the four most common problems on Krum properties:
- Post rotation from clay heave. A swing gate hung on a post set in unprepared soil will rotate a few degrees by late summer. That throws the rack-and-pinion drive out of mesh, the motor skips teeth, and eventually the drive burns out. We pull the post, dig a proper footing, and set it in concrete.
- Legacy slide gates jumping the track. Older slide gates on agricultural fence lines often lack real concrete footings under the track. The first freeze-thaw cycle shifts the track, the gate jumps it, and the loop detector wire gets shredded. That’s a common repair we make around Krum, and it’s almost always a footing problem, not a gate problem.
- Pre-2016 openers without safety photocells. Older openers installed before UL 325 requirements often lack proper entrapment protection. When that opener fails and you go to replace it, the new one won’t pass code without a photocell. We see this regularly on Krum properties where the gate has been hanging and operating since before the current regulations.
- Ice storm damage to hinges and welds. The ice storms that run through this corridor of Denton County seize hinges and snap welds on lighter ornamental gates. Residential-grade motors get overloaded trying to push ice-laden gates. We replace with welded hinges and recommend openers rated above the gate’s actual load for Krum winters.
On a ranchette off Plainview Road, we pulled a decade-old Viking operator off a 16-ft swing gate hung on a caliche-set hinge post. The post had rotated a full 3 degrees in one summer, throwing the rack-and-pinion drive out of mesh. Our crew cut the post, poured a proper concrete footing, and reinstalled the operator with a new safety photocell, then cycled the gate under freeze conditions to verify entrapment protection. That’s the difference between patching a symptom and fixing the soil problem underneath.
Pricing for Gate Installation in Krum, TX
Gate installation pricing in Krum lands higher than average because of the gate sizes and the soil work. Here’s what we quote on typical Krum jobs:
- Pedestrian gate: $600 to $1,500, depending on width and steel weight.
- Single driveway swing gate with opener: $2,200 to $4,000.
- Double swing gate with opener: $3,000 to $6,000, depending on gate length and automation choice.
- Sliding gate with opener: $3,000 to $5,500, including poured track footing.
- Full installation with two new posts set in concrete: add $500 to $900, depending on access and soil conditions.
We quote the full price before any work starts and put it in writing. Free estimates, free second opinions on any written estimate from another company, and a 5% senior and veteran discount on every job. If your project involves a retrofit on an existing farm gate, we’ll tell you if retrofitting makes sense or if a new gate is the cheaper answer over the long run.
We Also Serve Cities Near Krum
Our crews work Krum and the surrounding Denton County communities regularly. If you’re in Ponder, Denton, Argyle, or Justin, we can schedule a free measure and quote the same way we do in Krum. Dispatch runs from our Dallas-Fort Worth office, so a live person is always reachable at (254) 345-4831, and our technicians know the roads from Krum out toward Ponder and Argyle well enough to be there when we say.
Serving Krum, TX - Our Local Coverage Area
We’re based in the Krum area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Krum
Your gate post is moving in the Houston Black clay. Krum sits on highly expansive Blackland Prairie soil that shrinks hard in dry spells, and a post set without a proper concrete footing will shift seasonally. The fix is to pull the post, dig a deeper footing, set it in concrete, and re-hang the gate so it stays level through the wet and dry cycles. Call (254) 345-4831 and we’ll take a look at what’s under your post.
Sometimes. If the post is still plumb, has been set in concrete, and the gate is level, a new LiftMaster or Mighty Mule opener can be retrofitted. If the post has moved or was set directly in caliche, the operator will never hold alignment and you’ll burn through drive motors. We’ll tell you honestly which situation you have before we quote anything.
We recommend operators rated above the actual load of your gate, especially for the ice loads Krum gets in winter. LiftMaster and FAAC both build residential-grade units that tolerate overload better than the cheapest big-box openers, and adding a properly mounted safety photocell keeps the gate from closing on ice-damaged tracks or a person. We stock LiftMaster parts locally and can usually get a replacement FAAC board within a day or two.
Usually the post has shifted again. Heavy rain swells the clay, the post leans, and the gate no longer meets the latch or the track. On older Krum properties without concrete footings, this happens after nearly every significant rain. The permanent fix is resetting the post in concrete and realigning the gate so the operator can close it fully without binding. Call us and we’ll get it squared away.
Yes. If you’re replacing the operator or the gate, current UL 325 code requires entrapment protection, and that applies to private ranch roads just the same as it does to residential driveways. An older gate without a photocell won’t pass inspection if you install a new opener. We handle the photocell retrofit as part of any installation, including the wiring and mounting on farm fence lines.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Krum and Denton County for over 42 years.
Ready to get your Krum gate installed right? Call Ironworks Gate Co. today at (254) 345-4831 for a free estimate. A live person answers, every time.