Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Fast, Reliable Gate Access Control Across Krum
Gate access control in Krum usually comes down to one question: will the keypad, card reader, or phone entry system still work six months from now after the clay soil shifts? On Krum’s ranchette lots and older ranch parcels, the answer depends heavily on how the gate itself was hung and whether the posts underneath are stable. That’s the part most access control companies miss. We’re Ironworks Gate Co., and we’ve spent 42 years fixing what the soil does to gates and the hardware mounted on them. If you need Gate Access Control work done right the first time in Krum, call (254) 345-4831. A live person answers, day or night.
Why Ironworks Gate Co. Is Krum’s Preferred Gate Access Control Company
Krum homeowners don’t call us for a quick keypad swap. They call us because the gate that worked fine in February won’t latch in August, or the intercom stopped reading cards after a dry summer. The ground here moves. Krum sits on the Blackland Prairie, and the Houston Black clay that makes this farming country so productive also makes it hard on any gate not set in a proper concrete footing. Our crews know to check the post before they touch the wiring, because in Krum the post is usually the problem.
We’re led by Victor Salinas, who has spent decades working gates across North Texas ranch country, from new construction off FM 1173 to older homesteads near Plainview Road. Our technicians are background-checked, uniformed, and trained on nine automation brands. We also carry the parts local jobs actually need, so we’re not driving back and forth to a supply house while your gate hangs open. Most access control jobs in Krum are finished in a single visit.
Our written 90-Day Done Right Promise applies to every job. If something isn’t right, we come back and make it right. No arguing, no fine print. That’s the Keystone Standard, and it’s been the same since 1984.
Our Gate Access Control Services in Krum
Here’s what we handle most often for Krum homeowners and small HOAs. Each system gets quoted and agreed in writing before a single bolt turns.
Keypad Entry
Keypad entry is the most common access system on Krum acreage, and it’s also the most vulnerable to our soil. A keypad mounted on a gate hung from an uncemented post will slowly drift out of alignment as the clay contracts and expands. The keypad still works, but the strike plate doesn’t line up, so the code reads fine and the gate still won’t open. We install keypads on stable posts with proper footings, and we re-hang the gate if needed so the whole assembly stays in line.

Phone Entry
For shared driveways and small ranchette HOAs around Krum, phone entry systems let residents buzz in guests from a cell phone instead of sharing a code that gets passed around. We’ve installed phone entry on legacy ranch gates off Plainview Road and in newer acreage communities. The dial-in works through the resident’s own phone line or cellular module, which matters because underground conduit on older properties can crack as soil shifts and take a hardwired intercom down with it.

Smart Access
Smart access on a Krum gate usually means adding a Wi-Fi or cellular module to an existing opener so you can open and close the gate from an app, set scheduled access, and see a log of who came and went. On older ranch swing gates, this often requires correcting the mechanical side first. A smart module on a sagging gate still lets you open it remotely, but it doesn’t fix the fact that the gate won’t physically travel. We handle both.

Video Intercom
Video intercom gives you eyes on who’s at the gate before you open it. On Krum acreage, where the front gate might be a hundred yards from the house, that’s a real convenience and a real security step. We’ll mount the camera and call station, run or connect the wiring, and make sure the unit is protected from ice and direct Texas sun.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Krum
Whatever opener or access module is already on your gate, chances are we carry parts for it and have a technician trained on it. We service LiftMaster, FAAC, BFT, Mighty Mule, and six other major automation brands. If you have a LiftMaster keypad that’s failed, we typically have the replacement on hand for Krum jobs rather than ordering it and making you wait a week with an open driveway. Same goes for FAAC and Mighty Mule hardware. We’re a gate company, not a generalist, so our trucks are stocked for this work specifically.
Common Gate Access Control Problems We See in Krum Homes
- Keypad or card reader “no read” errors. The keypad works, the card works, but the gate won’t release. On Krum clay, the most common cause is a shifted hinge post pulling the strike plate out of alignment with the lock.
- Photoelectric sensors tripping for no visible reason. The gate drags after soil contraction, the beam gets interrupted, and the opener’s safety system leaves the gate stuck open. This shows up most in late summer on older ranch gates.
- Phone or intercom connectivity drops. Underground conduit on legacy agricultural properties cracks as the soil heaves, cutting the line between the house and the gate. We troubleshoot the line first, then the hardware.
- Stripped operator gears. A gate sags, somebody adjusts the panel settings to compensate, but the rack and pinion alignment was never re-set after the post moved. The motor works harder until the gears give out. We fix the alignment, not just the gears.
Pricing for Gate Access Control in Krum, TX
Here are honest ranges for what this work costs in Krum. A keypad replacement on an existing opener typically runs $350-$650 installed, with the keypad itself usually between $120 and $280 depending on brand and features. Phone entry systems for a single residence run $850-$1,500, while a shared system for a small HOA with two or three residences runs $1,800-$3,200. Adding smart access to an existing opener runs $450-$900. Video intercom systems start around $1,200 and go up from there depending on camera quality and whether we’re running new wire or connecting to cellular. Every quote is written and agreed before work starts. We also stand behind the standing offers: $50 off any repair over $250, and a free second opinion on any written estimate from another company. Call (254) 345-4831 for a free estimate.
We Also Serve Cities Near Krum
Our Krum crews regularly run to Krum neighbors as well. We handle gate access control in Ponder, Denton, Argyle, and Justin. Same written pricing, same 90-Day Done Right Promise, same live person on the phone.
Serving Krum, TX - Our Local Coverage Area
We’re based in the Krum area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Krum
Krum’s Houston Black clay expands and contracts more aggressively than the soils found 15 miles east in more developed parts of Denton County, and that means gate posts shift seasonally by inches. In Denton or Sanger, most gates sit on concrete footings in smaller lots. In Krum, many gates were hung decades ago on posts set in unprepared clay, so access control mounts, strike plates, and sensor beams all drift out of alignment as the ground moves. We check post stability before installing or servicing any access equipment. Call (254) 345-4831 if your keypad has been reading codes but not releasing the lock.
If your Krum property is in an HOA with architectural guidelines, the short answer is usually yes, especially if you’re changing the gate style, height, finish, or adding a new call station that’s visible from the road. Some HOAs also have rules about shared entry systems and who pays for them. We coordinate directly with your management company, submit whatever documentation they need, and we’ll tell you upfront if a change is likely to need a review. The job doesn’t start until the approval is in hand.
Yes, and this is a big share of our Krum work. The key is checking the post and hinge condition first. Adding a smart module to a gate that drags or sags only gives you remote control of a failing gate. We reset posts and re-hang gates where needed, then add the smart hardware so it actually works long term. Call (254) 345-4831 and we’ll walk the property and give you a written plan.
The most common failure is a keypad or card reader that reads the code correctly but won’t release the gate, caused by a shifted hinge post pulling the strike plate out of position. The electronics are fine; the ground under the post is not. On a ranchette off Plainview Road, we once reset a post that had heaved so badly the latch wouldn’t engage at all, then re-hung the gate and wired in a new keypad. Three weeks later the HOA called us back to add phone entry because the single keypad couldn’t keep up with guest traffic.
We handle them as a single coordinated job: post inspection, gate mechanical work, then the shared access hardware and any resident instruction needed. Small HOAs on legacy ranch parcels often need phone entry or video intercom instead of a single shared keypad, because guest traffic and service vehicles need managed access without handing everyone the same code. We’ll quote the whole system in writing before work starts. Call (254) 345-4831 and we’ll come walk the gate with your board or management company.
If you’re tired of a keypad that works half the year, or you need a shared entry system that actually holds up to Krum’s ground, call Ironworks Gate Co. at (254) 345-4831. Free estimates, written quotes, done right and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Krum and the surrounding Denton County communities.
Before
After
Before
After
Before
After