Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Flower Mound Homeowners
A gate that drags, sags, or refuses to open is more than an irritation. It’s a broken welcome mat, a security gap, and a daily reminder that something’s not right. Ironworks Gate Co. has repaired driveway and estate gates across Flower Mound since 1984. Led by Victor Salinas, our technicians arrive in uniform, diagnose the problem honestly, and fix it right, usually in a single visit. We answer the phone 24 hours a day, seven days a week. If your gate is stuck open, stuck shut, or making a sound it shouldn’t, call (254) 345-4831 and speak to a live person who knows gates. No voicemail, no callback queue, no waiting until Monday.
Every repair we complete is protected by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. That’s the standard on every job, from a simple hinge replacement to a full automation overhaul.
What Our Gate Repair Service Includes
Gate repair covers everything from the welded steel frame to the control board in the opener. Here’s what we actually do when a Flower Mound homeowner calls us out for Gate Repair in Flower Mound.
Electric Gate Repair
Electric gates fail in predictable ways: a dead capacitor in the motor, a burned relay on the control board, a short in the low-voltage wiring, or sensors knocked out of alignment by a mower or a storm. We start by testing the power supply at the source to rule out a tripped breaker or a failed transformer. Then we work backward through the system until we find the fault. Victor Salinas has trained our technicians to replace components rather than guess, which means you pay for the fix, not for someone else’s education.
Automatic Gate Repair
An automatic gate is a marriage of steel and circuit boards, and most failures happen where those two worlds meet. Limit switches wear out, loop detectors stop sensing vehicles, and remote receivers lose their pairing. We carry OEM parts for the major brands on our trucks, so the right board or sensor goes in on the first visit. Most automatic gate repairs in Flower Mound take between 90 minutes and three hours, depending on what’s failed.
Hinge & Post Repair
Heavy gates live and die by their hinges. When a post begins to lean or a hinge pin has wallowed out its hole, the gate drags on the ground and puts load on the opener it was never designed to bear. We cut out the old hardware, weld in new mounting plates where needed, and reset posts in concrete so they hold for decades. A sagging gate isn’t a cosmetic problem. It’s a mechanical failure in slow motion, and fixing it early saves the motor.
Gate Realignment
Temperature swings in North Texas clay soil shift posts and knock gates out of square. You’ll notice the gate scrapes the driveway, doesn’t close fully, or the lock no longer lines up with the strike. We realign the gate by adjusting hinges, shimming mounting points, and if necessary, cutting and re-welding the frame. Done right, the gate closes with a solid thunk, not a squeal, and the opener stops working overtime.
Lock Repair
A gate that closes but doesn’t lock is a gate that doesn’t do its job. We repair and replace mechanical gate locks, solenoid locks, maglocks, and keypad-controlled strike plates. In Flower Mound, we see a lot of locks that have corroded from years of sprinkler overspray hitting the gate. We’ll match the replacement to your existing hardware so you don’t end up with mismatched keys or a keypad that fights you.
Weld & Rust Repair
Texas heat and humidity work on steel year-round. Surface rust turns into scaling, scaling turns into perforation, and perforation turns into a gate section that flexes and breaks. We grind out rust, weld in new plate or tubing where the metal has thinned, and refinish the repaired area to slow the cycle. Our welders are not handymen with a buzz box. They’re fabricators who understand how gate frames carry load. A patch job that doesn’t address the underlying stress point just buys you a few months.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We service LiftMaster, FAAC, BFT, Mighty Mule, and every other major gate opener brand installed across Flower Mound. LiftMaster is common on residential swing gates in the area, and we keep their control boards, remotes, and safety sensors in stock for same-visit replacement. We’ve repaired enough LiftMaster units to know their failure patterns: the capacitors go first, then the limit switches. We check both before recommending a part.
FAAC and BFT are European hydraulic and electro-mechanical operators that show up on many higher-end estate gates in Denton County. They require different diagnostic tools and different muscle memory than domestic brands. Our technicians are factory-trained on both, and we stock their common wear parts. Mighty Mule gets installed by a lot of homeowners as a DIY opener, and it gets installed wrong about as often as it gets installed right. We sort out undermount bracket issues, receiver problems, and the always-popular “the gate opens but won’t close” scenario. Whatever make is on your driveway, we’ll repair it correctly, first visit. If you need Emergency Gate Repair in Flower Mound, TX, we respond fast.
Signs You Need Gate Repair Right Now
- The gate is moving slower than it used to. A gate that takes 30 seconds to open when it used to take 15 is telling you the motor is working harder than it should. Harder work means hotter windings and shorter motor life. The longer it runs slow, the more expensive the eventual fix.
- You hear grinding, squealing, or a heavy thunk when the gate moves. Metal-on-metal sounds mean a bearing, hinge, or gear is wearing out. That sound is not normal. It’s a worn component asking for attention before it seizes.
- The gate stops partway, then reverses or gives up. This is usually a limit switch or safety sensor problem. It’s also the most common reason a gate gets left half-open when you leave for work. We fix these quickly, but only if we get the call before the motor burns itself out fighting the obstruction.
- The gate is visibly sagging or dragging on the driveway. A dragging gate adds dozens of pounds of resistance the opener was never designed to handle. Every cycle shortens the life of the motor. Hinge and post repair costs far less than a full operator replacement.
- The gate won’t close, won’t lock, or the keypad stopped working. A gate stuck open is a security gap. A keypad that’s flickered out means someone is climbing out of the car in the rain. These are urgent matters. Call us and a live person answers, day or night.
Our Gate Repair Process - Step by Step
Here’s what happens when you call Ironworks Gate Co. for Best Gate Repair in Flower Mound, TX.
- 1
You call and a live person answers. No phone tree. No automated message. You describe what the gate is doing, and we ask a few questions that help us bring the right parts. Then we schedule a time that works for you.
- 2
On-site diagnosis with a written price. Our technician arrives in a marked truck, in uniform, background-checked. They test the gate, the opener, the safety systems, and the power supply. Then we give you a written price before any work begins. You approve the number, or you don’t. No pressure either way.
- 3
The repair, done right. We cut out the failed component and replace it with quality parts, not whatever was cheapest at the supply house. Welds are ground smooth. Wiring is routed and secured. Bolts are torqued to spec. The 400th job gets the same care as the first.
- 4
Testing and adjustment. We cycle the gate a dozen times. We check the force settings, the safety edges, the slow-down points, and the lock engagement. If the gate is automated, we verify the remote, the keypad, and the vehicle sensor all work together.
- 5
The 90-Day Done Right Promise. Before we leave, we walk you through what was fixed and why. Then we hand you our written guarantee. If anything is not right within 90 days, we come back and make it right. No paperwork, no arguing, no exceptions.
How Much Does Gate Repair Cost in Flower Mound?
Gate repair costs in Flower Mound vary based on what’s failed and how quickly it gets caught. A simple sensor realignment or limit switch adjustment typically runs $125 to $225. Hinge replacement on a single swing gate runs $275 to $450 depending on the weight of the gate and the condition of the post. Replacing a swing gate opener arm runs $350 to $650. A full control board replacement on a quality opener runs $400 to $850. Weld repairs run from $150 for a small crack to $600 or more for extensive rust repair and section replacement. These are the prices we see across Flower Mound, Argyle Gate Repair, and Denton, and they’ll be close to what you see on your written estimate.
What affects the price? The weight and size of the gate, the age and brand of the opener, whether parts are in stock or must be ordered, and whether the failure caused secondary damage. A gate that dragged for six months has usually damaged more than just the hinge. The best way to avoid overpaying is to catch the problem early. Our free estimates include a full inspection of the gate and opener, a written price, and a clear explanation of what’s urgent and what can wait. You’ll know the number before we turn a single bolt. We also offer a Free Second Opinion on any written estimate you’ve received. If another company quoted you a price, our technicians will review it and tell you honestly whether the work is necessary and whether the price is fair. Standing offers include $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.
Gate Repair Near Flower Mound - Our Service Area
Ironworks Gate Co. works throughout Flower Mound and the surrounding communities: Bartonville, Copper Canyon, Corinth, Double Oak, Hickory Creek, Highland Village, and Lantana. We also cover Gate Repair in Argyle and Gate Repair in Denton, with most calls answered within 24 to 48 hours and emergency calls dispatched sooner. If you’re west of 35E or north of 114, we’re close by. Our home service area extends to Justin, Krum, and the other towns where we’ve worked for over four decades.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Flower Mound
Gate repair is the process of diagnosing and fixing any component of a driveway or estate gate that’s failed, wearing out, or out of adjustment. This includes the gate frame, hinges, posts, welding, locks, the opener motor, control boards, sensors, wiring, and remote systems. At Ironworks Gate Co., we repair all of it, from the steel post in the ground to the circuit board in the opener.
Most gate repairs in Flower Mound are completed in a single visit lasting 90 minutes to three hours. Complex jobs involving post replacement or extensive welding may require a second visit after concrete cures or paint dries. When we give you a written price, we also give you a realistic timeline. Call (254) 345-4831 to schedule a time that works for you.
Gate repair typically costs between $125 and $850 depending on the failure. Sensor adjustments and limit switch replacements sit at the low end. Control boards, opener arms, and hinge replacements run toward the middle. Major weld and post repairs can run higher. You’ll receive a written price before any work begins, and our estimates are free. Call (254) 345-4831 for an exact quote.
Yes. We service LiftMaster gate openers every week across Flower Mound. Our technicians carry common LiftMaster control boards, remotes, and sensors on their trucks, so many repairs are completed on the first visit. We also service FAAC, BFT, Mighty Mule, Viking, Ghost Controls, DoorKing, Elite, and Linear. If your gate has a motor on it, we can almost certainly repair it.
In most cases, yes. A live person answers our phone 24 hours a day, seven days a week, and we prioritize emergency calls for gates stuck open, gates stuck shut, or security failures. We’ll tell you plainly when we can be there and we’ll be there when we say. Call (254) 345-4831 and tell us what’s happening. If we don’t have the part on the truck, we’ll tell you upfront and make arrangements to get you secure in the meantime.
Every gate repair we complete is backed by a written 90-day guarantee. If the repair fails or something isn’t right during the warranty period, we come back and correct it at no charge. No paperwork to file, no arguing, no exceptions. It’s called the Done Right Promise, and it applies to every job we do, from a simple hinge to a full automation repair.
Make sure the gate area is accessible and clear of vehicles, trash bins, or landscaping equipment. If you have pets, keep them inside during the visit. If you know the brand and model of your opener or have the remote handy, that helps our technician bring the right parts. You don’t need to disassemble anything, take the gate off its hinges, or attempt any electrical work. High-tension gates and openers carry real risk, and the best preparation is to leave the work to a trained professional. Call (254) 345-4831 with any questions before the appointment.
Schedule Your Gate Repair Service in Flower Mound Today
Your gate isn’t going to fix itself, and the longer it limps along, the more expensive the repair becomes. Call Ironworks Gate Co. at (254) 345-4831 for a free, no-obligation estimate. A live person answers, 24 hours a day. We’ll give you a written price before any work begins, stand behind the repair with our 90-Day Done Right Promise, and leave your gate closing like the day it was hung.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Flower Mound since 1984.