Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterBFT Keypad & Intercom Repair: The Flower Mound Owner’s Guide
We repair and replace BFT keypads and intercom units throughout Flower Mound, and most jobs are done in a single visit. Installed replacement typically runs $280 to $540 depending on the model and wiring condition, and we stock the common BFT-compatible parts on our trucks so there is no two-week wait on a backorder. The way most owners discover the problem is simple: the keypad works sometimes, the intercom crackles, or the gate simply stops responding to the code that worked fine last Tuesday.
Key Takeaways
- We carry BFT-compatible keypads, intercom boards, and weather seals for most RIGEL, MITTO, and DEIMOS-series systems.
- Installed replacement in Flower Mound runs $280 to $540, priced and agreed before we start.
- Most BFT keypad and intercom repairs are completed during one visit.
- Every job is covered by our written 90-Day Done Right Promise.
- Call (254) 345-4831 any hour and a live person answers, not a phone tree.
Which BFT Models This Applies To
We work on the full range of BFT keypads and intercoms found on Flower Mound driveways: the RIGEL 5 and RIGEL 6 digital keypads, the MITTO series remote-compatible panels, and the older DEIMOS keypads that BFT phased out years ago but are still running on plenty of gates around town. The compatibility gotcha with BFT is that keypads from the RIGEL line look nearly identical across generations, but the wiring harness and protocol changed between the RIGEL 4 and RIGEL 5. Plugging a newer keypad into an older control board without the adapter cable will leave you with a dead panel and a blinking error light.
If the label is faded or missing, we identify the unit by the number of conductors on the wire, the connector style, and the programming sequence on the board. For most Flower Mound homes, a genuine BFT replacement is the right call when the original keypad lasted fifteen years in Texas heat. Quality aftermarket equivalents can save $60 to $100, and we will tell you honestly when that path makes sense, typically on the older DEIMOS units where the OEM part is no longer manufactured.
Ironworks Gate Co. is an independent service company, not affiliated with BFT. We choose our stock by what holds up on the gates we service, not by a brand agreement.
Signs Your BFT Keypad & Intercom Repair Is Failing
- Intermittent entry: the code works in the morning but not the afternoon. That is usually a hairline crack in the keypad membrane letting Texas heat flex the circuit traces. The fix is replacement, not a battery.
- Crackling or dead intercom audio: moisture has worked its way into the speaker housing or the board. Flower Mound humidity and the periodic hard freezes do this to BFT intercoms over time.
- No backlight on the keypad: a failed voltage regulator on the keypad board, especially if the gate still opens from the remote. The keypad still looks fine from the outside, which fools a lot of owners.
- Gate opens on its own or refuses to close: a sticking relay on the keypad or intercom board sending phantom signals to the gate operator. This is the one to address quickly because a gate that cycles on its own is a safety issue.
- Buttons that require heavy pressing or multiple tries: worn conductive pads under the silicone. It is the same failure every membrane keypad eventually hits, and BFT keypads are no exception after a decade of sun exposure.
Replacement Cost & What’s Included
In Flower Mound, an installed BFT keypad or intercom replacement typically runs between $280 and $540. The range depends on three things: the specific BFT model, whether the existing wiring can be reused, and whether we need to replace the weather housing as well. Digital keypads trend toward the lower end of that range. Intercom units with a handset or multiple stations run higher because of the extra wiring and programming involved.
The price includes the part, installation, programming, and testing the full open-close cycle at least three times before we leave. You will see the total before we turn the first screw, and that number does not change unless we find something unrelated that you approve separately. Every job is covered by our written 90-Day Done Right Promise: if it is not right, we come back and make it right, no paperwork and no arguing. That is how Victor Salinas has run things since the start, because metal remembers how it was treated. So do customers.
| Service | Typical Installed Range in Flower Mound |
|---|---|
| BFT RIGEL 5 or 6 keypad replacement | $280 – $360 |
| BFT DEIMOS keypad replacement (aftermarket part) | $260 – $340 |
| BFT intercom board repair or replacement | $340 – $460 |
| BFT keypad plus intercom full swap | $430 – $540 |
Call (254) 345-4831 for an exact quote on your model. Estimates are free, and we will ask about the symptoms first so we bring the right part on the first trip.
DIY or Call Us?
You can do two things safely before calling us. First, check the power to the gate operator itself, since a tripped breaker or a disconnected operator will make a healthy keypad look dead. Second, clean the keypad face with a dry cloth, since built-up dirt can block the touch sensors. After that, we recommend stopping. BFT keypads and intercoms run on low-voltage wiring, but the gate operator they connect to carries line voltage, and an incorrect splice inside the housing can damage the control board or create a short. We have also arrived at more than one Flower Mound home where a well-intentioned DIY repair turned a $300 keypad job into a $900 board replacement.
If the keypad worked yesterday and does not today, call us. We will be there when we say, diagnose it honestly, and quote the fix before any work begins.
FAQs
Most BFT keypads on Flower Mound gates last 8 to 15 years before the membrane or board fails. Units mounted in full western sun tend to fail on the shorter end because the heat breaks down the silicone and traces faster than shade-mounted units. A keypad that has crossed the decade mark and is acting up is usually near the end of its service life. Call (254) 345-4831 and we will tell you honestly whether it is worth repairing or replacing.
Some faults can be repaired, including corroded terminals, loose wiring, and failed weather seals. Cracked membranes and burned board traces cannot, and we will not waste your money trying to band-aid a part that will fail again in six months. We will show you the failed component and explain the call before you spend anything.
A straightforward keypad swap takes about an hour from opening the housing to testing the open-close cycle. An intercom replacement with multiple stations can run two to three hours. Either way, most jobs wrap up in one visit, so you are not waiting days on a part we should have had on the truck.
We stock common BFT keypads, intercom boards, and weather housings on our trucks, and we keep a wider inventory at our shop for the older BFT series. We also stock compatible parts for LiftMaster, Mighty Mule, and Ghost Controls systems. If your exact part is not on hand, we will tell you upfront and give you a real answer on the timeline rather than a vague promise.
Call Ironworks Gate Co. for BFT Keypad & Intercom Repair in Flower Mound
If your BFT keypad or intercom is failing, call (254) 345-4831. A live person answers every call, 24 hours a day, 7 days a week, not a voicemail or an answering service. We will listen to the symptoms, tell you what we think over the phone, and schedule a visit that fits your day. The price is quoted and agreed before any work starts, and every job is backed by our written 90-Day Done Right Promise. Ironworks Gate Co. has served Flower Mound for over 42 years, and we plan to be here for another forty.
Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Flower Mound and nearby areas.