Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Fast, Reliable Gate Access Control Across Hickory Creek
Gate access control in Hickory Creek, TX typically costs $450-$1,700 for a complete keypad, intercom, or phone entry system installed on an existing automated gate, with most repairs running $150-$400. If your keypad has quit talking to your opener or the remote won’t wake the motor after a wet week off Lake Lewisville, that’s a same-day call for us. We’ve worked the lakefront properties along this shoreline long enough to know exactly what the humidity does to a circuit board and which hardware actually stands up to it.
Ironworks Gate Co. has been putting gates in and keeping them running for over 42 years. We’re not a handyman with a truck who “also does gates.” Gates are all we do. That matters when the failure is corrosion in a marine environment, not just a worn gear. Call (254) 345-4831 and a live person picks up, 24 hours a day. Not a voicemail. Not a callback queue. A person who can tell you whether we can get to your street today.
Why Ironworks Gate Co. Is Hickory Creek’s Preferred Gate Access Control Company
The homes in Hickory Creek lean custom and semi-custom, built from the late 1980s through the 2010s, and a lot of them sit on larger lakefront or lake-view lots with ornamental iron driveway gates. That means most of our work here involves both mechanical hardware and electromechanical openers together, not one or the other. We carry parts for nine gate-automation brands on the truck: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That’s not a brag. It’s the practical reason we usually finish the job in one visit instead of ordering a board and hoping you can wait a week.
Our techs are background-checked and uniformed. They work guided by the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. In a community where people tend to have lived in the same house for twenty years and plan to stay, that matters. The last thing you want is a crew that treats your gate like a one-off. We’re the company that makes a 40-year-old gate close like the day it was hung. And every completed job carries our 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions.
When you call us from Hickory Creek, you’re talking to someone who knows the difference between a gate in The Peninsula versus one off Swisher Road, and understands that a lakefront gate near the waterline is a different animal than a driveway gate up on the ridge. Dispatch schedules us into Hickory Creek daily, coordinated from our Dallas-Fort Worth office. We’re familiar with the streets, the HOA expectations, and the soil. That local knowledge is the difference between a repair that holds and one that fails in a season.
Our Gate Access Control Services in Hickory Creek
We install, repair, and maintain the full scope of Gate Access Control systems on existing automated gates and as part of new gate installs. For Hickory Creek specifically, we emphasize the systems that hold up in lake humidity and the ones that make lakefront living convenient without compromising security. Here are the core services our Hickory Creek customers request most.
Keypad Entry
A weatherized keypad mounted at the gate post is the most common access method for Hickory Creek homes, because it’s simple: a code gets you in, and nobody needs to carry a clicker. The failure we see most often here is not the keypad itself but corrosion creeping into the wiring junction where it connects to the opener, especially on properties within a few hundred yards of Lake Lewisville. We install sealed, marine-rated keypads with stainless steel mounting hardware as the default on lakefront jobs, and we always explain why that $20 upgrade saves a $300 return visit.

Remote Control
Remotes are reliable until they aren’t, and on lakefront Hickory Creek properties the point of failure is usually the receiver board inside the opener cabinet, not the handheld itself. Humidity condenses inside enclosures that weren’t weatherproofed for a marine environment, and the receiver gets intermittent. We stock replacement remotes and receivers for LiftMaster, FAAC, BFT, and Linear, and we can program most remotes on the spot. If your remote works in January but goes dead every July, that’s a board moisture problem. We can fix it properly rather than hand you a new remote and wait for it to fail.

Phone Entry
Phone entry, where the gate calls your cell phone when a visitor presses “call” at the gate, is growing quickly in Hickory Creek because so many homeowners are on the water and don’t want to walk up to the gate. The unit ties into a telephone line or cellular network and rings your phone; you press a button to open the gate. Installation on an existing gate typically runs $900-$1,500 in Hickory Creek depending on whether cellular or landline, and whether we’re adding a new power run. The important spec here is a cellular unit with a weatherized enclosure rated for high humidity. Landlines are fine, but cellular units mean one less copper wire to corrode.

Card Reader
Card readers are common on estate properties and a few of the gated communities around Hickory Creek, where multiple vehicles need access without sharing a single code. We install proximity readers and key fob systems that work with existing opener brands, and on waterfront properties we use readers with sealed, potted electronics designed to keep lake air out. If you’re managing multiple cards, we can walk you through programming, or we can handle it all for you.
We also install video intercoms and smart access systems that let you open the gate from a phone app, which is especially useful for lakefront owners who want to let a service person in from the dock or from across the lake. A typical video intercom with app-based access runs $1,200-$2,000 installed in Hickory Creek.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hickory Creek
We are factory-trained and equipped on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Hickory Creek, the most common opener brands we see on existing gates are LiftMaster and Mighty Mule, with FAAC appearing on some of the higher-end custom estates. We stock common replacement parts for these brands so we can make the repair the same day instead of ordering a board and coming back in a week. If you have a brand we don’t list, call us anyway. A lot of systems share components, and we’ll tell you honestly whether we can service what you have.
Common Gate Access Control Problems We See in Hickory Creek Homes
- Corroded circuit boards in gate operator cabinets. Lake humidity and salt air off Lake Lewisville condense inside opener enclosures, especially cheap sheet-metal cabinets without gasketed seals. The board corrodes, and the keypad or remote becomes intermittent. We replace boards and move them into weatherized, marine-rated enclosures. That’s the fix that lasts.
- Expansive clay soil heaving gate posts seasonally. Hickory Creek sits on Denton County black clay, and it swells when wet and contracts when dry. Gate posts lean, the gate sags, and the safety photocells trip or the rack and pinion jams. We reset posts with deeper footings and re-align the gate and sensors.
- Rust on lower gate hinges and posts near boat ramps. Any gate within 50 feet of the shoreline is in the splash zone, and standard steel hardware fails within a few seasons. We see this on secondary boat ramp gates up and down the Hickory Creek waterfront. The fix is stainless steel hinge posts and marine-grade components, not another coat of paint.
- Photocell and edge-sensor failures after ice storms. The January ice events that periodically hit this part of the Metroplex, like 2021, freeze hydraulic actuators and crack circuit boards in openers without heated or weatherized enclosures. After a hard freeze, we get calls about gates that won’t open or close, or that reverse for no reason. The repair is usually a new board and a better enclosure, plus a safety-edge check.
Pricing for Gate Access Control in Hickory Creek, TX
Here’s what gate access control work actually costs in Hickory Creek. A keypad entry install on an existing gate runs $450-$800. Remote control repair, including a new receiver board where needed, is $150-$400. Phone entry runs $900-$1,500 depending on cellular versus landline. Video intercom with smart app access is $1,200-$2,000. A full access control package including keypad, video intercom, and loop detector on a new gate runs $1,700-$2,800. These are real numbers for our Hickory Creek and lakefront market, not national averages. The biggest variable is whether the existing opener is worth saving or if corrosion has eaten it past repair. We quote the price and get your agreement before a single bolt is turned. Free estimates, always. Senior and veteran discount: 5% off, every job, no expiration. Call (254) 345-4831 for an exact quote on your gate.
We Also Serve Cities Near Hickory Creek
Ironworks Gate Co. serves Hickory Creek and the surrounding communities along the Lake Lewisville shoreline and inland: Flower Mound, Argyle, Denton, and Bartonville. If you’re just outside Hickory Creek proper, we likely cover your street as part of our regular route. Call and ask. The responsiveness you get from our local crews doesn’t change at the city line.
Serving Hickory Creek, TX - Our Local Coverage Area
We’re based in the Hickory Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Hickory Creek
Any gate within 50 feet of the Lake Lewisville shoreline, including boat ramp gates and gates at the water’s edge, needs marine-grade or powder-coated aluminum hardware instead of standard steel. The splash zone and constant humidity destroy standard steel hinges, posts, and circuit boards within two to three seasons. If your gate shows rust on the lower hinges or the keypad stops working after a wet stretch, that’s the lake doing its work. We recommend stainless steel hinge posts, sealed keypads, and weatherized enclosures on any lakefront gate, and we quote it that way from the start. A few hundred dollars in upgrades avoids repeat repair calls every year or two. Call (254) 345-4831 if you want us to look at your waterfront gate.
The failure is almost always condensation. Spring in Hickory Creek brings rain, the air is humid, and nighttime temperatures drop enough for moisture to condense inside a poorly sealed opener cabinet. When summer heat hits, the moisture doesn’t dry out; it accelerates corrosion on the circuit board. The result is an opener that behaves in April and quits in July. The fix is a weatherized, gasketed enclosure and a board replacement, not another reboot. If your gate works after a rain but fails when it’s hot, that’s your clue.
Yes, solar gate openers work on lakefront properties in Hickory Creek as long as the panel has clear southern exposure and the battery and board live in a sealed, weatherized enclosure. The Lake Lewisville shoreline gets strong Texas sun, which is good for solar output, but the humidity is hard on the battery terminals and the board. We install marine-rated solar systems with gel batteries on lakefront gates, and we size the panel for the shade patterns specific to your property. A solar opener with a battery backup is often the right answer for boat ramp gates where running line voltage to the water’s edge is impractical.
A marine-grade keypad entry with stainless steel mounting hardware and a sealed, potted circuit board is the best fit for a boat ramp gate that gets splashed. Standard keypads fail within a season or two in the splash zone, and card readers face the same problem. We also recommend a loop detector for vehicle exit, so the gate opens automatically when your boat trailer pulls up to the exit side. On a lakefront property along Hickory Creek’s western shore, our tech replaced a corroded LiftMaster operator board and seized hinge pins on a secondary boat ramp swing gate, then upgraded to stainless steel hinge posts and a marine-grade keypad, plus a loop detector for reliable vehicle exit. That combination is what actually lasts next to Lake Lewisville.
Test it by hand: with the gate open, place a solid object like a trash can in the closing path and press close. The gate should reverse before it makes hard contact. If it doesn’t, the safety edge or the photocell, or both, are dead. Ice storms, like the one in 2021, crack circuit boards and can leave the safety circuit dead while the motor still runs, which is dangerous, especially on heavy iron gates. We check entrapment protection on every access control service call in Hickory Creek, and we won’t leave a gate running if the safety circuit isn’t verified. If your gate reversed oddly after last winter, don’t test it with a person. Call (254) 345-4831 and we’ll inspect it properly.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hickory Creek and the Lake Lewisville shoreline with gate access control, gate repair, and gate installation. If your gate works against you instead of for you, call and we’ll make it right.
Before
After
Before
After
Before
After