Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Justin
Gate parts and welding in Justin usually means one of two jobs: repairing a heavy pipe-panel gate on a horse property off FM 156, or restoring an ornamental iron driveway gate in an HOA subdivision that’s been neglected too long. In both cases the fix comes down to the same thing: metal that was hung right the first time, then sagged, seized, cracked, or pulled out of plumb. Our crews work both sides of Justin every week, and we carry hardware for both on the truck: weld-on agricultural hinges and drop rods alongside operator brackets and ornamental scroll repair stock. If you need a gate put back in service, call (254) 345-4831 and we’ll get it quoted the same day.
Why Ironworks Gate Co. Is Justin’s Preferred Gate Parts & Welding Company
Victor Salinas founded Ironworks Gate Co. in 1984, and the company has spent more than four decades earning its reputation in north Texas gate work. We’re not a generalist handyman outfit dabbling in fences and gutters. Gate parts, welding, motors, and access control are all we do. That focus matters in Justin, because the town’s gate stock doesn’t look like Keller or Flower Mound. You’ve got active equestrian properties running welded pipe-panel gates thirty to fifty open-close cycles a day, and a mile away you’ve got estate-lot subdivisions with automatic ornamental iron gates on slide tracks. A company that only carries residential operator parts can’t help the horse farm. A farm fencing crew doesn’t know what to do with a FAAC board. We carry both, and we’ve learned over the years which problems repeat in which parts of Justin.
Every job we finish carries our 90-Day Done Right Promise in writing. No paperwork to file, no arguing. If the gate isn’t right, we come back and make it right. That’s the Keystone Standard, and it applies to a weld-on hinge replacement on a pasture gate exactly the same as it applies to a full automatic operator swap in a gated community.
Our Gate Parts & Welding Services in Justin
The heart of this work is straightforward: our Gate Parts & Welding team repairs and rebuilds the structural steel and hardware that other companies tell you to replace. Here’s what we handle most often in Justin:
Hinge Replacement
Worn hinges are the most common gate failure we see in Justin, and the symptom is always the same: the latch side drops, the gate drags, and the operator (if there is one) eventually burns out fighting the misalignment. On pipe-panel gates we cut out the old weld-on hinges and weld in new ones with the gate propped at the correct height. On ornamental iron, we match the hinge style and work within the community’s architectural standards so the repair doesn’t trigger a second HOA conversation down the road.
Post Replacement
Denton County black-clay soil is the real culprit behind most Justin post problems. The clay swells when wet and shrinks when dry, and over several seasons a gate post will heave, tilt, and throw the whole gate out of plumb. We dig out the old post, set a new one deeper with a proper concrete footing, and rehang the gate so it clears cleanly. Where the clay is especially active we’ll use a deeper footing profile than a typical suburban install. It’s the difference between a repair that lasts three years and one that lasts twenty.
Rail Repair
Gate rails crack, especially on ranch properties where a trailer clips a corner or a horse leans into the top rail. We cut out the damaged section, weld in new structural steel, and grind the repair smooth so it’s invisible after repainting. If the gate has been flexing long enough that the whole frame is sprung, we’ll straighten and reinforce it the same visit. Most rail repairs in Justin are done same day.
Custom Welding
Not every gate needs a repair only. Some need a modification: a taller top rail, a new cross-brace, a panel added to close a gap, a drop rod reengineered so it holds in high wind. We do custom gate welding in Justin with the same craft that built the original gate in many cases. If the steel is sound, we work with it. If it’s beyond saving, we’ll tell you honestly and quote you a replacement rather than patching something that’ll fail again in a season.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Justin
On the automation side, Justin properties run a mix of brands depending on when the gate went in and who installed it. We service and stock parts for Mighty Mule, LiftMaster, FAAC, and BFT, among others. If your gate is automatic and it’s binding, and the operator is throwing an error, the fix may not be the motor at all. It may be a hinge that’s welded too tight or a post that’s shifted. That’s the advantage of a company that does both the steel work and the operator work: we diagnose the whole gate, not just the box on the post.
Common Gate Parts & Welding Problems We See in Justin Homes
- Sagging swing gates on black-clay soil. The clay under the hinge post swells in spring, the post leans, and the latch side drops a half inch. Every year. We fix the root cause, not just the symptom, by setting the post deeper and correcting the hang.
- Delayed HOA repairs turning small issues into big ones. An ornamental iron hinge that needed a thirty minute weld repair sits for eight months waiting on architectural committee sign-off. By the time we’re called, the post is moving and the operator is shot. We can often work with your management company to get approvals moving faster.
- Shared entry gates failing at the safety photocell. In gated Justin communities, one dirty or misaligned photocell can lock out every resident on the property. It’s often a five minute fix, but it requires a technician who knows the system.
- Worn latches and locks on working horse properties. A gate that gets opened forty times a day wears out latches fast. Drop rods bend, slide bolts jam, and chain loops stretch. We replace them with heavier hardware than the original wherever the usage justifies it.
Pricing for Gate Parts & Welding in Justin, TX
Weld-on hinge replacement on a typical Justin pipe-panel gate runs $150 to $325 per hinge depending on gate weight and post condition. Full post replacement with proper concrete footing runs $400 to $900 per post. Rail repair and small custom welding jobs typically run $200 to $600. For ornamental iron gates in HOA communities, expect to add some cost for finish-matching and architecture-compliant hardware. Every quote is written and agreed before we turn a single bolt.
We currently offer $50 off any repair over $250, and a free second opinion on any written estimate you’ve gotten from another company. Veterans and seniors get a permanent 5% discount.
We Also Serve Cities Near Justin
If you’re in Ponder, Argyle, Flower Mound, or Krum, we run the same trucks and the same promise. Our Gate Parts & Welding in Justin team covers the whole northern Denton County corridor, so if you’re just outside town on a county road or inside a neighboring subdivision, call and we’ll get you scheduled.
Serving Justin, TX - Our Local Coverage Area
We’re based in the Justin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Justin
Black-clay soil swells with spring rain and pushes the hinge post out of plumb, dropping the latch side. The fix is a deeper post footing and rehanging the gate, not just tightening bolts. Call (254) 345-4831 and we’ll assess your posts and quote the repair before we start.
Usually yes. We prop the gate at the correct height, cut the old hinge off, and weld the new one on with the gate in place. If the post has moved in the clay, however, welding a new hinge won’t fix the underlying lean. We’ll tell you which situation you have before quoting.
For operator repairs, generally no. For structural or visible work like hinge replacement, post replacement, or custom welding on an ornamental gate, many Justin HOA communities require architectural review. We’ve worked with management companies across the area and can help you understand what documentation your repair needs so it doesn’t stall at the committee stage.
Winter freeze-and-thaw cycles shift the concrete pad and track, and the gate-to-rack pinch gets misaligned. Sometimes it’s the operator limit switches, sometimes it’s actual track movement. A technician from our team will diagnose it on site and tell you exactly what’s binding before quoting any work.
Latches are one of the fastest repairs we do, and on working equestrian properties we treat them as urgent. In most cases a replacement latch goes on the same day we get the call. If you’re on FM 156 and the gate won’t stay closed, call (254) 345-4831 and we’ll get a truck out.
Call Ironworks Gate Co. for Gate Parts & Welding in Justin
If your gate is sagging, dragging, or ripped out at the hinges, we’ll send a background-checked, uniformed technician to Justin who has the parts and the welder on board. You’ll get a firm written quote before any work starts, and the repair will be backed by our 90-Day Done Right Promise. A live person answers our phone 24 hours a day, 7 days a week. Call (254) 345-4831 for a free estimate on any gate parts or welding work in Justin, TX.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Justin and the surrounding communities since 1984.