Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Northlake
Gate Installation in Northlake typically starts with hinge replacement, which runs $240-$480 per hinge post depending on whether the post needs re-setting in concrete. Welding repairs for sagging or cracked gate panels usually land between $180-$650, and most jobs are done in a single visit. If your gate is binding, dragging, or refusing to close properly on your Northlake property, call Ironworks Gate Co. at (254) 345-4831 and we’ll get a technician out to look at it.
We work on gates throughout Northlake every week, from the equestrian parcels along Crawford Road to the newer communities off Highway 114. Victor Salinas runs our welding and parts crew, and he’s been straightening tilted posts and re-welding sagging gates long enough to know that Northlake soil does things to steel that neighboring towns simply don’t deal with. That local knowledge matters when you’re deciding whether a hinge can be saved or a post needs to come out entirely.
Why Ironworks Gate Co. Is Northlake’s Preferred Gate Parts & Welding Company
Forty-two years in this trade means we’ve seen just about every way a gate can fail. What sets Northlake apart is the soil. The Blackland Prairie clay under your property swells after spring rain and shrinks in August, and that movement works on gate posts like a slow pry bar. We account for it on every job we do here, and that’s why Northlake homeowners call us back when a different gate on their property needs attention.
Our Gate Parts & Welding team arrives in uniform, background-checked, and ready to work. Victor and his crew don’t rush a weld. They grind the joint clean, set the post right, and stand behind the work with our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard on every job, and it applies to a hinge replacement on a ranch gate in Northlake just the same as a full automation retrofit in Canyon Falls.
Scheduling and dispatch are coordinated from our Dallas-Fort Worth office, but the crews you’ll see at your gate are assigned to Northlake and know the communities here. We’ll be there when we say. A live person answers our phones 24 hours a day, seven days a week, so if your gate won’t close on a Sunday evening, you’re not waiting until Monday.
Our Gate Parts & Welding Services in Northlake
Hinge Replacement
When the clay under a Northlake post heaves, the post tilts and the hinge takes the brunt. A sagging gate grinds its hinges into ovals, and eventually the leaf lets go. We replace worn or seized hinges with appropriately sized steel, and if the post has moved, we correct that first so the new hinge isn’t fighting the same battle from day one. Most hinge replacements in Northlake run $240-$480 per post, including welding and alignment.
Post Replacement
This is the repair we do more than any other across Northlake. When a post has tilted three inches out of plumb, no amount of hinge adjustment will save it. The fix is digging out the old footing, re-setting a new post in concrete below the active clay zone, and welding the brackets back on true. On larger lots around Crawford Road and in Canyon Falls, we routinely set posts at 36 to 42 inches deep, which gets below the shrink-swell line that torments shallow footings.
Rail Repair
Ranch gates made from pipe rail and angle iron crack at the welds over time, especially where the frame meets the hinge side. We cut out the compromised section, weld in new stock, and grind the joint smooth before priming and painting. If your rail has torn loose from the post, we can often repair it in place without pulling the entire gate down, which saves you the cost of a full re-hang.
Custom Welding
Northlake HOAs often require specific gate styles, finishes, and heights, and a stock panel from a big-box store won’t always match. We do custom welding work that blends new powder-coated steel with older pipe or wrought-iron sections so the repair doesn’t announce itself from the street. Whether you need a panel fabricated to match an existing design or a complete gate built to your HOA’s architectural standards, we quote the job before any work starts, and the price we quote is the price you pay.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Northlake
We’re trained and equipped on nine gate-automation brands, and in Northlake we see a lot of LiftMaster, FAAC, and Mighty Mule operators for our Gate Motor & Opener in Northlake, especially on the solar-powered gates common on larger parcels. When a weld or hinge repair touches a motorized gate, the operator has to be re-aligned with the rack and pinion or swing arm, and that’s where generalist welders get into trouble. We handle the steel work and the automation in the same visit, so you’re not coordinating two trades and waiting twice.
We keep common hinge sizes, roller assemblies, latch components, and battery hardware in our local trucks, so most Northlake repairs don’t wait on a parts shipment. If a specialty part is needed for a BFT or FAAC operator, we order it the same day and return as soon as it’s in hand.
Common Gate Parts & Welding Problems We See in Northlake Homes
- Tilted hinge posts from clay movement. Northlake’s Blackland Prairie clay swells with spring rain and shrinks hard in summer drought. That seasonal push-pull slowly tips posts out of plumb, and a gate that scraped the ground in March may hang an inch lower in September.
- Sagging gates binding on the latch side. When a hinge post tilts even a few degrees, the entire gate takes a set. The latch no longer lines up, the panel drags on the driveway, and the operator strains against misalignment until something fails.
- HOA compliance issues with older ranch gates. Legacy acreage in Northlake often has gates that predate current architectural standards. A welded repair that leaves the gate mismatched or non-compliant can trigger a violation notice, so we match style and finish as part of the job.
- Solar operator failures after winter storms. On the larger lots where trenching power isn’t practical, solar-driven Mighty Mule and LiftMaster operators lose charge after hail or overcast weeks. The gate won’t move until batteries and panel wiring are addressed, and that work typically accompanies hinge or rail repairs.
Pricing for Gate Parts & Welding in Northlake, TX
A straight hinge replacement on a single post runs $240-$480, including welding, alignment, and adjustment. Post replacement with a new concrete footing below the clay line is $380-$750 per post depending on depth and post type. Rail and panel welding repairs fall between $180-$650, driven by the amount of steel we’re cutting out and the finish work required. A sag correction that involves realigning the gate and re-welding hinge brackets typically lands at $220-$500. Every job is quoted and agreed before work starts. You’ll know the number before a single bolt is turned.
Active standing offers can reduce those figures. Right now, Northlake customers can take advantage of $50 off any repair over $250, a free second opinion on any written estimate, and our $89 seasonal tune-up. Seniors and veterans save 5% on every job, always.
Key Takeaways
- Gate hinge replacement in Northlake: $240-$480 per post, quoted before work starts.
- Post replacement below the clay line runs $380-$750 and fixes the root cause of most Northlake gate failures.
- We serve every Northlake neighborhood including Pecan Square, Canyon Falls, and the acreage parcels along Crawford Road.
- Our Gate Parts & Welding in Northlake work is protected by the 90-Day Done Right Promise, in writing.
- Call (254) 345-4831 for a free estimate or same-week scheduling.
We Also Serve Cities Near Northlake
Our Northlake crews also cover the surrounding area, including Flower Mound, Argyle, Denton, and Bartonville. If you live just outside Northlake proper, give us a call at (254) 345-4831 and we’ll confirm coverage for your street and schedule a visit.
Serving Northlake, TX - Our Local Coverage Area
We’re based in the Northlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Northlake
It depends on your community’s architectural guidelines, but most Northlake HOAs require approval for visible modifications, and some require it even for repairs when the gate is visible from the street. Communities like Pecan Square and Canyon Falls generally treat gatework as an exterior modification, which means submitting a form before work begins. We can provide material specs, finish information, and a written scope of work to help you through that process, and many Northlake property managers accept our documentation directly. If you’re unsure, call your management office first, then call us at (254) 345-4831 to get the technical details squared away.
Northlake sits on expansive Blackland Prairie clay that swells dramatically when wet and shrinks when dry. After a wet spring, the topsoil around your post expands, lifts the footing, and when the clay dries it settles unevenly, leaving the post cocked out of plumb. If your post was originally set shallow, say 18 to 24 inches, it’s riding entirely in the active clay zone and will keep moving. The permanent fix is re-setting the post in concrete at 36 to 42 inches, below the shrink-swell line, which we do routinely for Northlake properties. Call (254) 345-4831 for an assessment and a firm quote.
Yes. We do custom fabrication and welding in Northlake that matches existing wrought-iron or ornamental steel designs, including powder-coated finishes required by HOA architectural standards. We’ll match the style, the spacing, the height, and the finish so the new panel blends with the rest of your gate and the streetscape. If your HOA needs a material spec or a finish sample for approval, we’ll provide it. The work is quoted before we start, and it’s covered by our 90-Day Done Right Promise.
Ask who has signing authority to approve the repair scope and payment, whether the gate is on a service contract, and what access they require from the contractor before work begins. On shared entry systems like those in Northlake’s master-planned communities, the gate may be managed by a third-party vendor, and we’ll need the management company’s written sign-off before we start cutting or welding. Also ask if there are specific hours when the gate can be down for repair, since shutting off a shared entry during school runs creates traffic issues. We’re used to coordinating with Northlake property managers and can work within those windows.
Yes, and this is where many welding-only shops fall short in Northlake. If your gate is automated and we re-weld hinges or replace a post, the gate’s swing path, stop points, and safety sensors need to be checked and often recalibrated afterward. Gate Access Control in Northlake requires entrapment protection, including photocells, loop detectors, and reversing mechanisms, by code and by common sense on any automated gate, especially in a community where kids wait for school buses. We handle the steel work and the safety system in the same visit, and we’re certified on LiftMaster, FAAC, BFT, Mighty Mule, and more. Call (254) 345-4831 to schedule a repair that gets your gate safe and compliant.
Call Ironworks Gate Co. for Gate Parts & Welding in Northlake
If your gate is sagging, binding, or won’t stay shut, don’t wait for the next rain or the next violation notice. Call Ironworks Gate Co. at (254) 345-4831 and tell us what’s happening. We’ll schedule a visit, quote the repair before we touch a bolt, and stand behind the work in writing. Done right, and backed in writing. That’s how we work in Northlake.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Northlake and the surrounding communities with gate parts and welding expertise.