Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Corinth
Gate repair in Corinth, TX usually comes down to one thing: the Blackland Prairie clay under your posts. When your gate drags on the ground in August or gaps at the latch after spring storms, the panel is rarely the root cause. It’s the footing. Most Corinth gate repairs run between $180 and $650 depending on whether we’re realigning hinge posts, resetting footings, or replacing a stripped operator. Call (254) 345-4831 and a live person answers, day or night. We’ll give you an upfront price before any work starts, and we stand behind it in writing.
Why Ironworks Gate Co. Is Corinth’s Preferred Gate Repair Company
We’ve worked on gates in nearly every subdivision Corinth has, from the older streets near Corinth Parkway to the newer builds off Dobbs Road. Most of our Corinth customers are on a first-name basis with their neighbors and their HOA board, which means they want a repair done once, quietly, and to the standard the covenants require. That’s how we work. Background-checked, uniformed technicians show up when we say we will, explain the repair in plain English, and leave the gate closing like it did the day it was hung.
Our crews are led by Victor Salinas, who has spent years training technicians on the specific failure patterns Corinth gates develop. Victor’s team has seen enough 2003 builder-grade operators stripped by clay-shifted posts to know that the operator is usually the victim, not the culprit. That experience means we don’t sell you a new motor when the real fix is a properly poured footing. Every Corinth job carries our 90-Day Done Right Promise in writing: if it’s not right, we come back and make it right. No arguing, no paperwork, no exceptions.
When you call (254) 345-4831, a live person answers 24 hours a day, 7 days a week. You won’t sit through a voicemail tree or wait for a callback. Most Corinth repairs are completed in a single visit, with the price settled and agreed before a single bolt is turned.
Our Gate Repair Services in Corinth
Gate Realignment
In Corinth, gate realignment is the repair we perform most often, and it almost always traces back to the clay. Denton County’s expansive Blackland Prairie soil swells in wet springs and shrinks hard during summer droughts, lifting and dropping gate posts by 2 to 4 inches a season. A gate that closed fine in March is dragging on the driveway by August. We don’t just shim the hinges and call it done. We measure the post movement, correct the lean, and pour a footing deep enough to sit below the clay’s active zone so the gate stays square through the next drought and the next wet spring. Realignment in Corinth typically runs $180 to $340 depending on how far the post has moved and whether the panel needs hinge replacement.
Hinge & Post Repair
Corinth’s 1990s and 2000s buildout left thousands of homeowners with wooden privacy gates hung on builder-grade hinges and posts set too shallow for the soil they sit in. When those posts heave, the hinges twist, the welds crack on steel gates, and the panel starts pulling away from the latch post. We reset posts in 18-inch-diameter concrete footings that reach below the clay’s movement zone, replace worn or bent hinges with heavy-duty hardware, and realign the panel to close flush. Hinge and post repair in Corinth generally runs $250 to $550, though a full post reset with concrete work can reach $650 if the old footing has to be jackhammered out.
Automatic Gate Repair
Many Corinth homes still run the original builder-installed swing gate operators from the early 2000s, and those units are reaching the end of their service life. The common failure we see across Corinth neighborhoods is a stripped rack and pinion gear, caused when a clay-shifted post torques the gate out of plane and the motor keeps pushing against the misalignment until the gears shred. We diagnose the cause before replacing the part. If the post movement isn’t corrected, a new operator will strip just the same. Automatic gate repair in Corinth typically runs $320 to $800 depending on whether we’re replacing the operator, the arms, or the control board. We service LiftMaster, Ghost Controls, Mighty Mule, FAAC, and BFT systems, and we stock the common parts locally so most jobs finish same day.
Electric Gate Repair
Electric gate systems in Corinth face two local pressures: clay movement stressing the mechanical components, and power delivery issues that date back to the original build. Many 1990s and 2000s Corinth homes were framed with no conduit run to the gate, so when homeowners switch from manual to automatic, the power has to be surface-mounted or handled with a solar opener, both of which run into HOA rules. We handle the full electric scope: wiring, control boards, keypads, safety photocells, and the UL 325 compliance items your HOA may require. Electric gate repair in Corinth typically falls between $280 and $600.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Corinth
Our Corinth technicians are trained and equipped on nine gate-automation brands, but the ones we see most on local driveways are LiftMaster, Ghost Controls, and Mighty Mule. Because Corinth is close enough for our crews to run parts quickly, we keep common components for these brands stocked and ready, which means we don’t have to order in a control board and put your gate repair off for a week. If your opener is a builder-grade LiftMaster from the 2000s or a retrofit Mighty Mule, we know the failure points specific to those units and the clay underneath them.
Common Gate Repair Problems We See in Corinth Homes
- Posts heaving from clay expansion and contraction. Corinth’s Blackland Prairie clay swells with spring rain and shrinks in summer drought, lifting posts 2 to 4 inches a season. We see this in every subdivision off Corinth Parkway and Dobbs Road, and it’s the root cause behind most gate sag in the city.
- Stripped gears on builder-grade swing operators. The 2003-era LiftMaster and Mighty Mule units installed across Corinth’s original buildout have rack and pinion drives that strip when clay-shifted posts torque the gate out of plane. The operator isn’t defective; the footing under it moved.
- Manual wooden gates sagging into the latch post. By August, after a dry Texas summer, the clay beneath hinge posts has shrunk enough to drop the latch side of the gate by an inch or more. The panel drags, the latch misses, and the gate won’t stay closed against the wind.
- No power or conduit run to the gate. Corinth homes built before automated gates became common often have no electrical run from the house to the gate. Homeowners who want automation face surface-mounted wiring, which many HOA covenants prohibit, or a solar opener, which needs careful sizing for our cloud cover.
Pricing for Gate Repair in Corinth, TX
Here’s what Corinth homeowners can expect. A gate realignment that corrects post lean and rehangs the panel runs $180 to $340. Hinge and post repair, including resetting a post in a proper concrete footing, lands between $250 and $650 depending on how deep the old footing goes and whether demolition is needed. Automatic gate repair ranges from $320 for a control board or arm replacement up to $800 for a full operator swap with safety photocells. Electric gate work, including wiring corrections and keypad replacement, runs $280 to $600. Every price is quoted and agreed before we start work, and estimates are free. Seniors and veterans get a permanent 5% discount, and we offer $50 off any repair over $250. If you have a written estimate from another company, bring it in and we’ll give you a free second opinion.
We Also Serve Cities Near Corinth
Ironworks Gate Co. serves Corinth and the surrounding Denton County communities. Our Gate Repair team regularly works in Flower Mound, Argyle, Denton, and Bartonville. If you’re in Corinth or a neighboring city, call (254) 345-4831 and a live person will answer. We coordinate dispatch and scheduling from our Dallas-Fort Worth office, and crews serve Corinth locally.
Serving Corinth, TX - Our Local Coverage Area
We’re based in the Corinth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Corinth
Your gate posts are sitting in Blackland Prairie clay, and that clay shrinks hard during the dry North Texas summer. In March the soil is swollen with spring rain and your gate closes clean. By August the clay has contracted 2 to 4 inches vertically, dropping the hinge post and pulling the gate out of square. The fix is not a shorter gate panel. The fix is resetting the post in a concrete footing poured deep enough to sit below the clay’s active shrink-and-swell zone, typically 18 inches or more in diameter and below the movement line. A Corinth realignment with post reset runs $250 to $650. Call (254) 345-4831 and we’ll take a look, no charge for the estimate.
In most Corinth subdivisions, yes. Many communities along Corinth Parkway and Dobbs Road have covenants that dictate gate materials, colors, hardware styles, and sometimes even operator brands. If your repair involves a visible change, like a new gate panel or a different opener, you’ll usually need HOA approval first. We know how this works and we’ll help you put together what your board needs. If the repair is a direct replacement of the same hardware with no visible change, most HOAs don’t require a submission. We’ll tell you which category your repair falls into before we start.
It depends on how your home was built. Many 1990s and 2000s Corinth houses were framed without a conduit run from the breaker panel to the gate, so there’s no easy electrical path. Your options are surface-mounted conduit, which your HOA may prohibit, or a solar-powered opener like the Ghost Controls kits we install regularly. Solar works well in Corinth because our gate count is manageable and the panels charge even on partly cloudy days. If you have a clear southern exposure at the gate, solar automation is a clean retrofit that avoids trenching across your yard. A full solar opener install with safety sensors typically runs $700 to $1,100 in Corinth. Call (254) 345-4831 for a free measure and written quote.
Because the post moved. A LiftMaster swing operator from the early 2000s has a rack and pinion drive that pushes a gate through a fixed arc. If the hinge post heaves or shifts in Corinth’s clay, the gate no longer swings through that arc cleanly, and the gears bind and strip. The motor was doing its job; the footing under the post wasn’t. We see this constantly in subdivisions built during the original Corinth buildout. The correct repair is to reset the hinge post below the clay line first, then replace the stripped operator or its drive gears. If you skip the post work, the new operator will fail the same way. Repairs like this run $400 to $800 in Corinth depending on the operator model.
Yes, and that’s the normal repair in Corinth. When heavy Denton County spring rains saturate the clay, posts can shift and lean while the panel itself stays intact. We reset the affected post or posts in a properly sized concrete footing, leaving your existing gate panel and hardware in place. Once the concrete cures, we rehang the panel, realign the latch, and if the gate is automated, we retune the operator travel and force limits. Most post reset jobs finish in one visit. Post reset with rehang in Corinth runs $350 to $650. Call (254) 345-4831 and we’ll give you an exact quote free of charge.
Call Ironworks Gate Co. for Gate Repair in Corinth
If your gate is dragging, sagging, leaning, or stalling, call (254) 345-4831. A live person answers 24 hours a day, 7 days a week. We’ll talk through what’s happening, give you an honest read on what it takes to fix, and set a time that works for you. Estimates are free, the price is agreed before work starts, and every repair carries our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. That’s the way we’ve done it for over 42 years, and that’s the way we’ll do it on your gate in Corinth.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Corinth homeowners with gate repair, automation, and post work for over four decades.