Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Justin
A new driveway or farm gate in Justin typically runs $2,800-$9,500 installed, depending on the gate’s span, material, and whether it’s automated with Justin Gate Access Control. Most residential installs we schedule in Justin are completed within two to three weeks of the initial measure, and we quote the full price before any metal is cut. If you’re on an acreage property along FM 156 or in one of the newer estate subdivisions off John Day Road, the right gate has to handle this specific soil and weather, not just look good at the curb. Ironworks Gate Co. has been doing exactly that since 1984. Call (254) 345-4831 and we’ll come out, measure, and give you a written number.
Why Ironworks Gate Co. Is Justin’s Preferred Gate Installation Company
Justin is not a one-size-fits-all market, and we’ve learned that the hard way over the years. The town splits between working horse properties that need a 20-foot pipe-panel gate that can take a beating and estate-lot homes that want an ornamental iron driveway entrance with a quiet operator. We do both, and our crews know which one they’re looking at within the first thirty seconds of pulling up.
Victor Salinas runs our operation, and he’s built the company around a simple rule: the 400th job gets the same care as the first. Every Justin installation we complete carries our 90-Day Done Right Promise in writing. If something isn’t right, we come back and make it right. No paperwork, no arguing. Our Gate Installation team includes welders and automation techs who are trained on nine opener brands, which means we don’t have to call a third party when your LiftMaster or Mighty Mule needs programming. A live person answers our phone 24 hours a day, 7 days a week. Not an answering service.
Our Gate Installation Services in Justin
Driveway Gate Installation
Most Justin driveways fall into one of two camps: short, paved entrances in subdivisions like Trailwood or The Preserve, and long gravel drives running back to barns on the county roads. For the subdivision homes, we’re usually installing a full ornamental iron swing or slide gate with an automatic opener, safety sensors, and a keypad. For the acreage places, it’s often a heavy pipe-panel gate with a solar-powered operator because running conduit two hundred yards through black clay isn’t worth the money. A standard residential driveway gate in Justin runs $3,200-$7,800.
Pedestrian Gate Installation
Pedestrian gates get overlooked, and then they get annoying. We install walk gates beside driveway gates all over Justin, matched to the same ironwork so the whole entrance looks like it was designed together, because it was. A standalone pedestrian gate with a privacy latch or keypad lock in Justin typically costs $1,200-$2,600 installed, including concrete-set posts.
Sliding Gate Installation
Sliding gates make sense on Justin properties where the driveway slopes up from the road or where a swing gate would block half the entrance while opening. We see this constantly on FM 156 frontage and in the acreage neighborhoods north of town, where drainage swales leave no room for swing geometry. A sliding gate setup with a rack-and-pinion or chain drive operator in Justin usually lands between $4,500 and $10,000, depending on whether you need Gate Parts & Welding in Justin for a cantilever system or a ground track. We recommend cantilever for Justin’s clay soil, because a ground track will eventually fill with silt and bind.
Swing Gate Installation
Swing gates remain the most common choice in Justin’s estate subdivisions, where HOA guidelines often call for ornamental iron and a classic look. We build single and double swing gates, set the hinge posts, and mount the operator arm. On a double swing gate, we also run the synchronization so both leaves open together without wobbling. Pricing for a swing gate install in Justin starts around $2,800 for a single manual gate and runs up to $9,500 for a fully automated double with battery backup.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Justin
Our techs carry parts and programming toolkits for LiftMaster, DoorKing, Elite, and Mighty Mule, among others, so when we install an operator in Justin we’re not waiting on a distributor to ship a board from out of state. That matters when your gate is the only thing between a loose horse and FM 156. We install commercial-duty operators on farm properties and quieter residential units on estate lots, chosen by cycle count, not by what’s on sale at the big box store.
Common Gate Installation Problems We See in Justin Homes
We’ve worked in Justin long enough to know what fails and when. Here’s what we see most often:
- Black-clay soil heave. Denton County’s expansive clay swells in wet springs and shrinks in dry summers. Hinge posts set too shallow, or in too small a footing, tilt within a year and throw swing gates out of plumb. Our standard footing in Justin is 36 inches deep minimum, and 42 inches for double gates.
- Undersized solar operators. A solar kit sized for a light residential gate in a suburb will die mid-cycle on a horse property where the gate opens 40 times before noon. We size operators by actual cycle count, not by the width stamped on the box.
- Blue Norther ice damage. When an ice storm hits in January or February, rack-and-pinion slide gates freeze solid. Someone hooks a chain to the gate and drags it open with a tractor, and the gears strip. We replace those drives and recommend heated rail strips where practical.
- Wide farm gates with light-duty hinges. A 20-foot pipe-panel gate has enormous leverage at the hinge. Weld-on agricultural hinges need to match the panel weight, or the gate sags from day one. We see this constantly on setups a previous owner had done cheap.
Pricing for Gate Installation in Justin, TX
Here’s what you should expect to pay in Justin’s market, before any discounts:
- Manual single swing driveway gate: $2,800-$4,200
- Automatic single swing gate with operator: $4,500-$7,500
- Automatic double swing gate with openers and sync: $6,500-$11,000
- Sliding gate with cantilever hardware and operator: $5,000-$10,500
- Solar-powered operator on a rural pipe gate: $3,800-$6,800
- Pedestrian gate with locking: $1,200-$2,600
You’ll get the exact number in writing before any work starts, and that number doesn’t change unless you change the scope. Standing offers apply in Justin: $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% discount for seniors and veterans. Estimates are free. Call (254) 345-4831 and we’ll put a time on the calendar.
Justin’s Dual-Market Reality: Farm Gates and Estate Gates
Justin sits at the working edge of the DFW exurban frontier in northwest Denton County, and that’s not something you can say about Roanoke or Haslet. This town is simultaneously a ranching community and a growth-corridor destination. On the horse properties clustered along FM 156 north of town, a single gate may be opened 30 to 50 times a day by trucks hauling trailers, tractors, and livestock handlers. That pace destroys hardware that was never designed for it. On those jobs, an annual maintenance contract on a commercial-duty slide gate operator is the difference between a sagging, misaligned panel and a gate that still closes cleanly three years in.
Two miles away in the 2010s-era estate subdivisions off John Day Road, the same company has to know how to hang ornamental iron swing gates that meet HOA standards and run quietly enough that neighbors don’t complain about the motor. Justin requires a gate contractor fluent in both worlds. Most companies are one or the other. We’re both.
Our crew installed dual 20-foot pipe-panel swing gates on a working equestrian property off FM 156, using LiftMaster commercial operators with solar panels and battery backup because running mains power to the post footing would have meant trenching over 400 feet of black clay. We set 8-inch steel posts in concrete, added a loop detector for trailer exit, and programmed keypad entry for the barn manager. The gates still cycle cleanly after a Blue Norther. That’s the standard we build to in Justin.
We Also Serve Cities Near Justin
Ironworks Gate Co. runs crews to Justin and the surrounding communities every week. If you’re in Ponder, Argyle, Flower Mound, or Krum, the same team, the same written promise, and the same 24-hour live phone line apply. We quote and install Gate Installation work the same way in every town we serve: upfront, in writing, and done right.
Serving Justin, TX - Our Local Coverage Area
We’re based in the Justin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Justin
Thirty-six inches minimum for a single swing gate post, and 42 inches for double gates or anything over 16 feet wide. Justin’s expansive clay heaves seasonally, and a shallower footing will tilt within a year or two. We also use larger diameter footings than some installers, typically 18 to 24 inches, to resist lateral movement. Call (254) 345-4831 and we’ll tell you exactly what your soil calls for.
Yes, and in most of rural Justin it’s the smarter play. We size solar arrays and battery banks based on your gate’s actual cycle count. A gate opening 40 times a day needs a different panel and battery setup than one opening 8 times. We install solar-powered operators from LiftMaster and others, with battery backup so the gate keeps working through the cloudy stretch after a Blue Norther.
For a 20-foot pipe gate on a working horse property, we recommend a commercial-duty linear or ram operator, not a residential swing opener. The heavy-gauge steel and high cycle count will kill a light-duty unit. We typically spec LiftMaster or DoorKing commercial operators on these jobs, often solar-powered. The difference in cost is modest, but the difference in service life is measured in years.
Yes. Any automatic gate we install in Justin includes entrapment protection: photoelectric sensors, reversing edges, or both, depending on the gate type and location. This is not optional. It’s code and it’s basic common sense, especially on properties where children or livestock are present. We test every safety device before we leave the property, and it’s covered under the same 90-day promise.
The black clay under your hinge posts swells when it absorbs spring rain, then shrinks in summer. That movement tilts the posts out of plumb, and the gate leaf sags. The Gate Repair - Justin fix is usually deeper footings and steel cross-bracing on the gate leaf itself, not a repeated hinge adjustment. We correct the root cause, not the symptom. Call (254) 345-4831 for an exact quote. Estimates are free.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Justin and Denton County since 1984.