Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Double Oak
Gate access control in Double Oak usually means one of three jobs: adding keypad or phone entry to a street gate that’s been there since the 1980s, replacing an operator on a wide pasture gate off a caliche drive, or wiring video intercom into an estate entrance so you don’t have to walk down 150 feet of driveway to see who’s there. We handle all three, from Gate Repair in Double Oak to full system upgrades, and we do it with a live person answering the phone at (254) 345-4831, 24 hours a day, 7 days a week. Victor Salinas and the crew at Ironworks Gate Co. have been serving Double Oak homeowners long enough to know which gates shift with the clay and which operators fill with caliche dust before they fail.
Most access control repairs in Double Oak run $180-$340 for common fixes like keypad replacement or receiver board swaps. Double Oak Gate Installation, including a new operator, keypad, and safety edges, typically runs $1,450-$3,800 depending on gate width, power availability, and whether we’re trenching new wire or going solar. We quote the price before any work starts and we stand behind every job with our written 90-Day Done Right Promise.
Call (254) 345-4831 for a free estimate. A live person answers, not a voicemail tree.
Why Ironworks Gate Co. Is Double Oak’s Preferred Gate Access Control Company
Double Oak is not Flower Mound. The lots are bigger, the driveways are longer, and a lot of the gates out here are older than the homeowners’ children. We know the difference. Our Gate Access Control team has repaired keypads, intercoms, and operators on Chinn Chapel Road, along Waketon Road, and throughout neighborhoods off Simmons Road where the driveways wind back past horse barns and workshop buildings. We know which operators hold up to the dust and which ones don’t.
Every technician who rolls into Double Oak is background-checked, uniformed, and carrying parts for nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters out here because when your gate won’t open and you’ve got a horse trailer blocking the driveway, we don’t want to tell you we’ll order a part and come back next Thursday. Most jobs are completed in a single visit.
We’re not a one-truck outfit. Ironworks Gate Co. was founded in 1984, and we’ve spent over 42 years doing one thing: gates. Driveway gates, estate gates, pasture gates, and the electronics that run them. No general handyman work, no fencing side hustle. Just gates, done right, and backed in writing.
Our Gate Access Control Services in Double Oak
Keypad Entry
Keypad entry is the workhorse of Double Oak access control. A wired or wireless keypad at the street lets delivery drivers, ranch hands, and visiting family punch in a code without you handing out remotes. We install weatherproof keypads rated for direct Texas sun and 100°F-plus summers, and we harden the housings against the fine caliche dust that climbs into everything on unpaved drives. A standard keypad replacement or retrofit in Double Oak runs $220-$450 installed.
Remote Control
Remotes fail, get lost, or get run over by the mower. We program replacements on-site, and because our trucks carry stock for Gate Motor & Opener - Double Oak brands like LiftMaster, FAAC, and Mighty Mule, we can usually get your remote synced and working the same day we arrive. If your existing receiver is too old to pair with modern remotes, we can swap in a new receiver for $145-$280 without replacing the whole operator.
Phone Entry
Phone entry is a good fit for Double Oak homes with long driveways where guests arrive before you hear them. A phone entry system ties into your gate operator and calls your cell phone when someone presses the call button at the street. You can talk to them, then open the gate from your phone. Installation runs $1,200-$2,800 depending on whether we’re running phone line, cellular, or VoIP. For acreage properties without a landline, we typically recommend a cellular unit.
Card Reader
Card readers make sense when you’ve got regular visitors: caretakers, boarding clients, service contractors. A proximity reader at the gate lets you issue and revoke cards without changing a shared code. We install standalone readers and readers integrated into full access systems, and we’ll walk you through programming so you’re not calling us every time you need to add a card. Expect to spend $850-$1,900 for a quality card reader installation in Double Oak.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Double Oak
We’re trained and equipped on nine gate-automation brands, and the three we see most on Double Oak acreage are LiftMaster, Ghost Controls, and FAAC. LiftMaster dominates the older residential installs from the 1990s and early 2000s. Ghost Controls shows up often on solar-powered farm and pasture gates. FAAC is common on wider, heavier ornamental iron estate gates. Because we carry common boards, receivers, and remotes for all three in our trucks, our Double Oak calls rarely require a return trip for parts.
Common Gate Access Control Problems We See in Double Oak Homes
- Post heave from expansive clay. The Denton County clay under Double Oak swells and contracts with every rain cycle. Gate posts that were plumb in 1995 lean out of alignment by 2026, and suddenly your swing gate drags, binds, or refuses to latch. The fix is resetting the post in a properly sized footing, not just adjusting the limit switches.
- Caliche dust inside operator housings. Long unpaved driveways produce a fine granite dust that climbs into circuit boards, capacitors, and motors. We open operators out here that look like they’ve been through a sandstorm. Sealing the housing and adding filtered vents is part of every Double Oak install we do.
- Summer heat killing circuit boards. When temperatures sit above 100°F for weeks, the inside of an unvented operator housing can reach 140°F or more. Capacitors swell, solder joints crack, and boards die. Battery backups also degrade faster in that heat. We recommend vented housings and battery checks before every summer.
- Aging operators on 20-to-30-year-old gates. A lot of Double Oak entry systems were installed when these homes were built, and those operators are at the end of their service life. We’re honest about when a repair will hold versus when replacement is the better use of your money. A new operator typically costs $950-$2,600 installed, and we’ll tell you before we start which way we’d go if it were our gate.
Pricing for Gate Access Control in Double Oak, TX
Here are the numbers we quote most often in Double Oak, so you can plan before you call:
- Keypad replacement or retrofit: $220-$450 installed
- Receiver replacement: $145-$280 installed
- Remote programming and syncing: $65-$110 per visit (often bundled with other repair work)
- Card reader installation: $850-$1,900 installed
- Phone entry system: $1,200-$2,800 installed
- Video intercom system: $1,400-$3,200 installed
- Full access control system with new operator, keypad, and safety edges: $1,450-$3,800 installed
- Solar-powered operator for a pasture or farm gate: $950-$2,400 installed
These are installed ranges, not parts-only prices. Your final number depends on gate width, power availability, and whether we’re trenching wire or going solar. We write the quote down before any work starts, and the price we quote is the price you pay. Estimates are free. Call (254) 345-4831 and we’ll schedule a time that works for you.
Double Oak’s unique setup matters here: many properties have both an automated ornamental iron driveway gate and one or more functional pasture gates elsewhere on the lot. That’s not two separate service calls for us. Our techs handle the electronics and the agricultural hardware on the same visit, which keeps your total cost down because we’re already on-site.
We Also Serve Cities Near Double Oak
Ironworks Gate Co. serves Double Oak and the surrounding communities, including Gate Access Control in Double Oak and nearby Flower Mound, Argyle, Denton, and Bartonville. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with local crews serving Double Oak directly. If you’re on the edge of town or just across the county line, call (254) 345-4831 and ask if we cover your street. We probably do.
Serving Double Oak, TX - Our Local Coverage Area
We’re based in the Double Oak area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Double Oak
In Double Oak, the usual cause is post heave. The expansive clay under Denton County swells with rain and contracts in drought, slowly pushing your gate posts out of plumb. Once a post leans even a half inch, the gate leaf drags on the ground or the latch no longer aligns. Adjusting the operator or fiddling with the hinges won’t fix it. The post needs to be excavated, reset in a deeper concrete footing, and the gate re-hung. We see this constantly on older estate gates off Chinn Chapel Road and Simmons Road. Call (254) 345-4831 and we’ll tell you honestly whether your lean is a reset or a more involved repair.
Yes, and in Double Oak it’s often the better choice. Running mains power down a 200-foot caliche driveway means trenching, conduit, and usually a subpanel, which adds real cost. A solar-powered operator with a battery backup avoids all of that, and modern units from Ghost Controls and Mighty Mule handle full-size pasture gates without struggling. The key is properly sizing the panel and battery for our summer heat, and sealing the housing against caliche dust. We’ve done this exact install on Chinn Chapel Road, where a client’s long unpaved drive made trenching impractical. The solar unit has run reliably through multiple summers. Expect to spend $950-$2,400 installed depending on gate width and panel size.
Caliche dust is fine enough to pass through the vent holes on most operator housings, and once it coats the circuit board and motor, heat builds up and components fail. The fix is sealing the housing, adding filtered vents, and cleaning the board annually. On every Double Oak install we do, we seal the operator housing before we leave. If your operator is already dust-packed, we can clean it, replace any failing components, and seal it going forward. Call (254) 345-4831 to schedule a service visit; we’ll assess the dust situation and give you a straight answer.
For Double Oak’s dual gate properties, we typically recommend a single controller system that manages both gates from one keypad and one app. Your ornamental iron gate at the street gets a keypad, phone entry, or video intercom, while the pasture gate runs on a simple keypad or fob system tied to the same controller. That way you’re not juggling two remotes and two codes. The controller lives at the house, and both operators run off it. Installation costs depend on gate types and distances, but a full dual-gate system in Double Oak typically runs $2,600-$5,500. Call (254) 345-4831 for a free site visit and a written quote.
North Texas summer heat is hard on electronics. Inside an unvented operator housing, temperatures can climb well past ambient, and that’s when capacitors swell, solder joints crack, and boards fail. The fix is a vented housing, a heat shield where possible, and proper sealing against the dust that makes heat retention worse. We also recommend checking battery backups before summer hits, because those degrade faster in sustained heat. If your board has died more than once, we’ll look at the whole setup rather than just swapping the board again. Call (254) 345-4831 for an honest assessment.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Double Oak and the surrounding North Texas communities.