Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Double Oak, TX
Gate repair in Double Oak typically runs from $180 for a basic hinge adjustment or limit switch fix to $1,400 or more for a full operator replacement on a long estate driveway. Most service calls from Double Oak are completed in a single visit, and we answer the phone live around the clock because a gate stuck halfway across your driveway is not a Monday-morning problem. If your gate is binding, dragging, or refuses to close, call (254) 345-4831 and a real person will pick up.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Double Oak Homeowners Choose Ironworks Gate Co.
Double Oak is not a tract-home town. The properties here run an acre and up, the driveways are long, and the gates were often hung decades ago and expected to work forever. The homeowners we serve in neighborhoods like Double Oak Estates and Rolling Oaks have usually been in their homes for twenty years or more, and they have dealt with enough one-truck operations to know the difference between a patch job and a repair that holds. They choose Ironworks because we carry nine major automation brands on the truck, because our technicians are background-checked and wear a uniform, and because every job we finish is covered by a written 90-Day Done Right Promise. Victor Salinas built this company on a simple rule: if it is not right, we come back and make it right. No paperwork, no arguing. That promise means something on a 40-year-old iron gate that has been fighting the North Texas clay since the 1980s.
Gate Repair Services We Offer in Double Oak
Gate Repair
A sagging gate, a hinge pulling loose from a post, a latch that will not catch, a wheel that has ground itself flat against the caliche. These are not small problems in Double Oak, where a gate that will not latch leaves horses loose and a driveway open. We weld, straighten, re-set posts, and replace worn hardware on the first trip whenever the parts are on hand. Learn more about our Gate Repair in Double Oak.
Gate Installation
New construction or a full replacement, measured to the inch, quoted in writing, and built to handle what the weather and the soil here actually do to a gate. We do not sell you a gate that will fight the clay. We install one that works with it. Learn more about our Gate Installation in Double Oak.
Gate Motor & Opener
Operators fail on a schedule around here, and the schedule is usually August. Capacitors, circuit boards, and battery backups all hate the 100-degree summers. We carry parts and full replacements for LiftMaster, FAAC, BFT, and Mighty Mule systems, and we can tell you honestly whether a repair or a replacement is the smarter money. Learn more about our Gate Motor & Opener in Double Oak.
Gate Access Control
Keypads, intercoms, telephone entry, vehicle detection loops, and the wiring that ties it all together. For Double Oak properties with a house at the back of the lot and a street gate at the front, the access system is the difference between a working driveway and a daily inconvenience.
Gate Parts & Welding
Ornamental iron cracks, steel rusts through, and hinges wear oval. Our welding is done on site when conditions allow, and we fabricate or source the correct replacement part rather than adapting something close enough. Close enough is not how we work.
Neighborhoods We Serve in Double Oak
We run service calls across Double Oak regularly, and our typical response window is same-day for urgent repairs and within 48 hours for scheduled work. The neighborhoods we see most often:
- Double Oak Estates
- Rolling Oaks
- Copper Canyon area (along FM 407)
- Oak Bend
- Properties east of Chinn Chapel Road
Why Double Oak’s Climate & Housing Affect Gate Repair
Double Oak sits on Denton County’s expansive clay, and that clay moves. It swells after spring rain, shrinks in August, and every cycle works the gate posts a little further out of plumb. We see it constantly: a gate that closed perfectly in April drags against the ground by July, or a post that has leaned just enough that the automatic opener fights the geometry on every cycle. The fix is not always just tightening a hinge. Sometimes the footing has to be dug out, re-set, and stabilized so the gate has a square frame to swing on. That is the difference between a repair that lasts a season and one that lasts a decade.
There is another Double Oak-specific issue we deal with more than almost anywhere else in the metro: dust. A large share of driveways here are caliche or decomposed granite rather than paved concrete. Fine dust works its way into operator housings, coats the control board, and eventually cooks the electronics. Photocells get buried, limit switches clog, and motors burn out from heat they cannot shed. A technician who only works paved subdivisions rarely sees these failures. We see them weekly.
Pricing for Gate Repair in Double Oak
Every job is quoted and agreed upon in writing before we turn a single bolt. There is no surprise on the bill. Here is what Double Oak homeowners can typically expect:
- Diagnostic service call: $75-$125, applied toward the repair if you proceed
- Hinge, bracket, or latch repair: $180-$400, depending on weight and access
- Post re-setting (single post): $350-$800, including footing work for clay movement
- Operator control board or capacitor replacement: $250-$550
- Full operator replacement: $900-$1,400+ for estate-grade systems
Active offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (254) 345-4831 for an exact quote on your gate.
Service Area - Cities Near Double Oak
While our Double Oak crews handle calls across the town daily, we also serve surrounding communities. You can read about our work in Flower Mound, Argyle, Denton, and Bartonville. Dispatch for the region is coordinated from our Dallas-Fort Worth office, with technicians routed locally to Double Oak.
Serving Double Oak, TX - Our Local Coverage Area
We’re based in the Double Oak area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Double Oak
Most Double Oak gate repairs fall between $180 and $800, with full operator replacements running higher. The final number depends on the gate’s weight, the damage, and whether we are re-setting posts that the clay has shifted. You will get the exact price in writing before any work begins. Call (254) 345-4831 for a free estimate.
Yes, in most cases. We keep same-day availability for urgent repairs like a gate stuck open, a gate that will not close, or a fallen gate blocking the driveway. A live person answers our phone 24 hours a day, 7 days a week, so you will not leave a voicemail and wait for a callback.
We do, and it is one of the reasons we fit Double Oak well. The town’s ordinance allowing horses on residential lots means many properties have a motorized ornamental gate at the street and functional pipe or wood gates further back on the property. We are comfortable with both the automation side and the agricultural hardware side, often on the same visit.
That is almost certainly the Denton County clay. The soil under your gate posts expands when wet and shrinks when dry, slowly moving the posts out of alignment. The real fix is re-setting the post with a properly built footing, not just forcing the gate back into position. We handle that kind of correction regularly in Double Oak.
We service and replace openers from nine major brands, including LiftMaster, FAAC, BFT, and Mighty Mule. If your system is one of those, we likely have the correct part on the truck when we arrive. If it is something older or uncommon, we will tell you straight what your options are and quote the job before any work starts.
Contact Ironworks Gate Co. in Double Oak
If your gate is giving you trouble, call us at (254) 345-4831. We will talk through what is happening, give you a straight answer on what it should cost, and schedule a time that works for you. No pressure, no voicemail maze, no invoice you did not agree to. Just a square deal, a guaranteed repair, and a gate that closes like it should. Back to our home page if you would like more about who we are and how we work.
Written by Victor Salinas, Owner at Ironworks Gate Co.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Double Oak Customers Say
"The hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a new gate, which two other companies had pushed for."
- Megan Whitaker"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad