Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Parts & Welding in Argyle, TX: Built for Horse Country
Gate Installation - Argyle starts with parts and welding means working on two very different kinds of entrances: the pipe-and-cable ranch gate on a working equestrian property off Crawford Road, and the ornamental iron estate gate guarding a newer subdivision home on a 2-acre lot. Both fail differently, and both need a technician who understands Blackland Prairie clay, long solar wire runs, and gates wide enough for a 16-foot horse trailer. Ironworks Gate Co. has been fixing gates like these for over 42 years, and we answer the phone 24 hours a day at (254) 345-4831. If your gate sags, scrapes, or won’t cycle, we’ll send a uniformed, background-checked technician to Argyle with the parts and the welder on the truck.
Key Takeaways
- Gate post shift from Argyle’s expansive clay soils is the single most common reason for hinge and rail repairs on acreage properties.
- Solar-powered swing operators installed on 2000s-2020s era Argyle estates are now hitting their 10-15 year major service cycle, creating a local wave of parts replacement work.
- We stock heavy-duty hinges, post materials, and operator parts sized for wide equestrian gates, not just suburban driveway gates.
- Every job is quoted and agreed before work starts, and backed by our written 90-Day Done Right Promise.
- Call (254) 345-4831 anytime. A live person answers, not a voicemail tree.
Fast, Reliable Gate Parts & Welding Across Argyle
When a gate stops closing, or sags so badly the latch won’t catch, Argyle homeowners don’t have time to wait on a callback. We know the roads here: Crawford Road, Copper Canyon Road, FM 407, and the long private driveways that branch off them. Our technicians drive them regularly. Most Gate Parts & Welding calls in Argyle are completed in a single visit because we arrive with the right hinges, post materials, and welding equipment already on the truck. You get a live person when you call, a square-deal price before any work begins, and a gate that operates like it should when we leave.
Why Ironworks Gate Co. Is Argyle’s Preferred Gate Parts & Welding Company
Argyle is not Flower Mound. It’s not Denton. It’s horse country with 1-5 acre parcels, long driveways, and gates that have to earn their keep. We’ve worked on entrances along Harpole Road, down by the Argyle High School area, and through the newer estate subdivisions that have grown up around the town’s equestrian core. Homeowners here tend to keep their properties for decades. So do we. Ironworks Gate Co. was founded in 1984, and we plan to be on these same roads for another forty years.
Our reputation in Argyle rests on the details: a hinge welded square, a post set deep enough to hold against clay heave, an operator wired clean and programmed right the first visit. We’re not the cheapest bid in town, and we don’t try to be. We’re the company that makes a 20-year-old gate close like the day it was hung. The Keystone Standard is our internal name for the way we work: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first.
Our Gate Parts & Welding Services in Argyle
Hinge Replacement
Hinges on Argyle gates carry more weight than most people realize. A 16-foot pipe gate with a cable and a heavy pull handle can easily exceed 400 pounds, and when the hinge post shifts even a few degrees out of plumb from clay heave, the hinge takes all that stress. We cut out rusted, wallowed-out hinge barrels and weld in replacement hinges rated for the weight and the span. Our technicians ask the right questions before starting: does this gate need to clear a horse trailer, will it cycle multiple times a day, is it paired with an operator?
Post Replacement
Argyle’s Blackland Prairie and Cross Timbers soils expand when wet and shrink bone-dry in summer. That seasonal movement works posts loose over time, especially the hinge post, which carries the live load of the gate. We know it’s not enough to set a new post in concrete and call it done. On long acreage entrances we set replacement 6×6 or 8×8 posts deeper than standard, brace them square, and realign the entire gate so the latches and operator limits line up from day one. Done right, a replacement post in Argyle should hold for decades, not seasons.
Rail Repair
The top and bottom rails on a pipe gate take abuse from sag, wind, and livestock leaning against them. We see cracked welds at rail-to-post connections, bent rails on gates hit by trucks or trailers, and rail joints that have pulled apart after years of stress concentrated at a failing hinge. Argyle gates often have longer rail spans than suburban gates, which means the welding has to be right. We cut out the damaged section, fit new steel, and weld it hot with proper penetration. This isn’t a tack-weld patch. It’s repair meant to outlast the original gate.
Custom Welding
Sometimes the right fix is not a part off a shelf. We weld custom brackets to mount a new operator on an old post, fabricate drop rods and cane bolts for double gates, and build up worn latch plates that no longer hold reliably. On a ranch off Crawford Road, our tech found a 20-foot pipe-and-cable swing gate sagging badly at the hinge post, the post itself shifted out of plumb by Blackland Prairie clay heave. We cut out the rusted hinge brackets, welded new heavy-duty hinges onto a fresh 6×6 post with a deeper concrete footing, and realigned the gate to clear a 16-foot horse trailer. The client now cycles it with Argyle Gate Motor & Opener service from the truck cab without a hiccup. That’s the kind of custom work we do all over Argyle.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Argyle
We’re trained and equipped to service nine major gate-automation brands, including Ghost Controls repair in Argyle, and that matters more than most places. The solar-powered swing operators common on acreage properties here are often LiftMaster, FAAC, or Mighty Mule units that were sized for a suburban gate and asked to swing a farm gate twice as wide. We carry replacement boards, gears, hinges, and battery packages sized for heavy gates, plus the brackets and hardware needed to remount an operator when a post is replaced or reinforced. No waiting a week for a part to ship. We bring what the job needs to Argyle the first time.
Common Gate Parts & Welding Problems We See in Argyle Homes
- Hinge post drift from clay shrink-swell. Argyle sits on expansive soils that expand and contract dramatically between wet winters and dry summers. When the hinge post moves, the gate drops, the latch misses, and the rails at the far end start pulling apart. Post reset and realignment solves it properly.
- Undersized solar operators on wide gates. Running electrical conduit hundreds of feet down a private Argyle driveway is often cost-prohibitive, so solar operators are common. But a unit sized for a 12-foot gate struggles with a 16-20 foot gate, burning out batteries and stripping rack-and-pinion gears. The operator needs to match the gate’s weight and span.
- Freeze damage from hard Denton County cold snaps. The February 2021 freeze cracked hydraulic actuators, circuit boards, and keypad wiring on operators not rated for extended sub-freezing temperatures. Replacement parts often require welded bracket fabrication to fit the new component to the old post.
- Stress fractures at rail-to-hinge welds. Long, heavy gates concentrate stress at the hinge end. When the gate sags, the welds at the rail connections start to crack, and the failure feeds on itself. Cutting out the old weld and re-welding hot, then realigning the gate, stops the cycle.
Pricing for Gate Parts & Welding in Argyle, TX
A typical hinge replacement on an Argyle acreage gate runs $240-$480, depending on hinge weight rating and whether the post needs realignment. Post replacement with a new 6×6 post, concrete footing, and gate realignment typically lands between $650-$1,200. Rail repair and custom welding work generally runs $180-$550 per repair section, depending on metal thickness and access. Operator parts replacement varies by brand and model, but a clear quote comes before any work starts. Every price is settled in writing before a single bolt is turned. Estimates are free, and we back each job with the 90-Day Done Right Promise. Senior and veteran homeowners receive a 5% discount, always.
We Also Serve Cities Near Argyle
Our gate parts and welding crews regularly work in Argyle and the surrounding towns: Flower Mound, Denton, Ponder, and Justin. If your property is just outside town limits, call anyway. We’ll tell you straight whether we can get a truck to you today.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Argyle
Argyle sits on a transition zone of Blackland Prairie and Cross Timbers clay soils that shrink and heave dramatically with seasonal moisture changes. Flower Mound has some of this, but Argyle’s large-lot equestrian parcels mean more gates on less-compacted native soil, fewer concrete aprons around posts, and longer open spans that amplify any post movement. The fix is deeper footings, proper bracing during setting, and gate realignment after the post is set. Call (254) 345-4831 to have us evaluate your post and quote the reset.
Yes, but only if the operator, battery bank, and solar panel are properly sized for the gate’s actual weight and span. Many Argyle estate gates were fitted with residential-grade solar operators sized for a 12-foot suburban gate, and they fail repeatedly when asked to cycle a 16-20 foot pipe-and-cable gate. The fix usually involves a commercial-rated operator, a larger battery, and sometimes a second solar panel. We can specify and install the right setup. Call us for a straight answer and a written quote.
The most common welding repairs we do on Argyle ranch gates are cutting out rusted hinge barrels and welding on new heavy-duty hinges, re-welding cracked rail-to-post joints, fabricating replacement drop rods and cane bolts, and building custom brackets to mount a new operator on an old post. Each repair is welded hot with proper penetration, not tacked. Most are done in one visit. Call (254) 345-4831 and describe what you’re seeing. We’ll tell you what it probably needs.
Extended sub-freezing temperatures crack hydraulic actuator housings, fry circuit boards, and damage keypad wiring on operators not rated for sustained cold. In Argyle, many solar and hydraulic systems installed in the 2000s-2020s were never spec’d for that kind of cold, so post-freeze failures are common. Replacement often involves welding new mounting brackets to fit the updated component. We carry the brackets, the welder, and the parts to do it in one trip.
Yes. Texas law and the UL 325 standard require entrapment protection on automated gates regardless of whether the road is public or private. That means monitored safety edges, photo eyes, or another compliant system that stops and reverses the gate if someone or something is in the way. If your gate predates the current standards or the safety edges are damaged, we can provide Gate Access Control in Argyle to weld new edge brackets and bring the system into compliance. Call (254) 345-4831 and we’ll walk you through what your gate needs.
Ready for a Gate That Stays Fixed?
If your Argyle gate is sagging, grinding, or refusing to cycle, call Ironworks Gate Co. at (254) 345-4831. A live person answers, 24 hours a day, 7 days a week. We’ll schedule a free estimate, give you a written price before any work begins, and stand behind the job with our 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Argyle and the surrounding Denton County communities since 1984.