Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Double Oak
Gate repair in Double Oak usually falls into two camps: the automated iron driveway gate at the street, and the pasture gate out back. We handle both on the same call, because around here they often fail together. If your gate is sagging, grinding, or refusing to open, call (254) 345-4831 and a live person answers. We have been fixing gates for over 42 years, and we know what Denton County clay and caliche dust do to a gate operator.
Why Ironworks Gate Co. Is Double Oak’s Preferred Gate Repair Company
Double Oak is not Flower Mound. The lots are bigger, the driveways are longer, and a lot of the gate hardware has been in the ground since the 1980s and 90s. That means the technician who shows up needs to understand expansive clay soil, aging operators, and the difference between a weld that holds for a season and a weld that holds for twenty years. Our Gate Repair team has been working on acreage properties across Double Oak long enough to know which failure modes repeat and how to stop them permanently.
Victor Salinas, who runs our crews, keeps the standard simple: leave the gate working like it should, stand behind the work in writing, and treat the customer’s property like it belongs to family. Every job we complete is backed by the 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing. That is the Keystone Standard, and it applies to every gate we touch in Double Oak.
We answer the phone 24 hours a day, seven days a week. Not an answering service, not a callback queue. When a gate will not open and the car is stuck in the driveway, you get a person on the line who can dispatch a background-checked, uniformed technician to your property. Most repairs in Double Oak are finished in a single visit, and the price is settled before a single bolt is turned.
Our Gate Repair Services in Double Oak
Electric Gate Repair
Electric gate repair in Double Oak typically runs $180-$450 depending on the failure. Common culprits on the acreage lots here are burned-out control boards, failed capacitors, dead battery backups, and loop detectors that have drifted out of adjustment. We service nine automation brands, including LiftMaster, Mighty Mule, FAAC, and BFT, so we carry the right boards and components on the truck and usually complete the fix the same day we arrive.
Automatic Gate Repair
Automatic gate repair in Double Oak often means diagnosing the whole system, not just the part that screamed loudest. A gate that stops mid-travel might have a bad limit switch, a failing motor, or a hinge post that shifted in the clay and threw the geometry off. We test the motor under load, check the amperage draw, inspect the drive chain or actuator, and then fix what actually failed. Most automatic gate repairs here run $220-$600, with complete operator replacements landing between $1,200 and $3,800 depending on horsepower, swing versus slide configuration, and access control integration.
Hinge & Post Repair
This is the most common call we get in Double Oak, and it is usually a soil problem wearing a hardware costume. Denton County clay expands when wet and contracts when dry, and a gate post set in that soil twenty years ago has been moving a little every season since. Eventually the post leans, the hinges bind, and the gate drags or fails to latch. Hinge and post repair in Double Oak generally runs $250-$800 depending on whether we can re-set the existing post, need to pour a deeper concrete footing, or have to cut and re-weld the hinge brackets on a steel frame. On pasture gates, we also see stretched and sagging hinges from horses leaning on the gate, which is a repair we handle on the same visit when we are out for the driveway gate.
Gate Realignment
Gate realignment in Double Oak normally costs $150-$400 when it is a straightforward adjustment: re-hanging a sagging panel, truing the hinges, or adjusting a slide gate that has begun rubbing. If the realignment requires cutting and re-welding the frame, the price lands higher, usually $400-$900. A gate that is visibly out of plumb should not be ignored. The added friction makes the operator work harder, which shortens the motor’s life, and on an automatic gate it can cause the safety photocells to misalign, so the gate refuses to close or reverses for no apparent reason.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Double Oak
Our technicians are factory-trained on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Double Oak, we see a lot of LiftMaster slide operators on the older estate entrances and Mighty Mule units on the newer solar-powered pasture gates. We stock boards, remotes, photo eyes, and replacement arms for the brands we service most often here, which means fewer return trips and faster turnaround when your gate is down.
Common Gate Repair Problems We See in Double Oak Homes
- Caliche dust in the operator housing. A significant share of Double Oak driveways are unpaved caliche or decomposed granite. That fine dust migrates into gate operator housings and is a leading local cause of motor burnout and control board failure. Sealing the enclosure and adding a dust shield is part of our standard operator replacement.
- Clay-driven post movement. The expansive clay under Double Oak shifts posts out of plumb every wet-dry cycle. Swing gates begin to bind, drag, or fail to latch. Without re-setting the footings to a proper depth, the problem returns within a year or two.
- Heat-degraded electronics. Summer temperatures above 100°F cook circuit boards, capacitors, and battery backup units on operators mounted along long, unshaded rural driveways. We check thermal wear on every repair call in July and August.
- Dual gate neglect. Many Double Oak properties have an automated ornamental gate at the street and a functional pipe or wood pasture gate further back. The pasture gate often gets ignored until a horse pushes through it. We inspect and service both on the same visit when we are out.
Pricing for Gate Repair in Double Oak, TX
Here are straight numbers for the Double Oak market. Electric gate repair: $180-$450. Automatic gate repair: $220-$600, with full operator replacement at $1,200-$3,800. Hinge and post repair: $250-$800. Gate realignment: $150-$400 for standard adjustment, $400-$900 if welding is required. Lock repair on an ornamental driveway gate: $85-$250 depending on whether we replace the lock body, the strike, or the whole latch assembly. Weld and rust repair on wrought iron: $150-$750 based on the number of pickets, rails, and the extent of corrosion.
Every quote is written down and agreed to before we start. The price you sign off on is the price you pay. No surprise line items, no “we found more while we were in there” unless you approve it first in writing. Estimates are free. Call (254) 345-4831 and we will schedule a time that works for you.
We also honor several standing offers on every Double Oak job: $50 off any repair over $250, a free second opinion on any written estimate from another company, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Double Oak
Our crews cover Double Oak and the surrounding communities of Flower Mound, Argyle, Denton, and Bartonville. If you live just over the town line, the same 24-hour phone support and 90-Day Done Right Promise apply. Read more about our work in Double Oak, or call us directly and tell us what your gate is doing.
Serving Double Oak, TX - Our Local Coverage Area
We’re based in the Double Oak area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Double Oak
Because the expansive clay under your gate posts swells when it absorbs water, pushing the posts out of plumb and throwing the gate frame out of alignment. This is the single most common gate problem in Double Oak, and it returns every year unless the footings are re-set at a proper depth. Call (254) 345-4831 and we will inspect the posts, the hinges, and the operator together, then give you a written quote for a permanent fix. Estimates are free.
Yes, and this is exactly the kind of call we recommend Double Oak homeowners make. Double Oak permits horses on residential lots, so many properties have a high-end automated iron gate at the street and functional pipe or wood pasture gates further back. We routinely service both on the same visit, which saves you a second trip charge and lets us catch small pasture gate problems before they become big ones. Call (254) 345-4831 for an exact quote.
In Double Oak it is. Unpaved caliche and decomposed granite driveways generate fine dust that infiltrates operator housings and causes motor burnout and control board failure. We have addressed this on properties all around town, including a job off Chinn Chapel Road where we replaced a 20-year-old LiftMaster slide operator motor on a caliche driveway, sealed the enclosure, added a dust shield, and re-set the hinge post on the adjacent ornamental swing gate that had shifted out of plumb in the clay, all on the same service call. Call (254) 345-4831 and we will quote a repair that accounts for your driveway’s dust load.
Once a year is the right interval for most Double Oak homes, preferably in the spring before the summer heat arrives and again after a particularly wet fall. Our $89 seasonal tune-up includes checking the motor’s amperage draw, testing the safety photocells, adjusting limit switches, lubricating the chain or actuator, inspecting the battery backup, and flagging any post movement before it damages the operator. Call (254) 345-4831 to schedule a tune-up, or to ask what a tune-up for your specific gate would include.
We are trained and equipped on nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Double Oak we see a lot of LiftMaster slide operators on the older estate entrances and Mighty Mule units on solar-powered pasture gates, but we carry parts and boards for the full list. Call (254) 345-4831 with your operator’s brand and model, and we will tell you over the phone whether we can fix it same-day or need to order a specific board.
Call Ironworks Gate Co. for Gate Repair in Double Oak
When your gate is down, call (254) 345-4831. A live person answers, 24 hours a day, seven days a week. We will ask a few questions about your gate, give you a straight answer on pricing, and schedule a time that works for you. The technician who arrives will be background-checked and uniformed, and the work will be done right and backed in writing. That is how we have done it for over 42 years, and how we plan to do it for the next forty.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Double Oak and the surrounding Denton County communities.